Configuration Guide

CONFIGURING HT–286THROUGH VOICE PROMPT

DHCP Mode

Select voice menu option 01 to enable HT–286 to use DHCP.

STATIC IP Mode

Select voice menu option 01 to enable HT–286 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

Firmware Server IP Address

Select voice menu option 13 to configure the IP address of the firmware server.

Configuration Server IP Address

Select voice menu option 14 to configure the IP address of the configuration server.

Upgrade Protocol

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP and HTTP.

Firmware Upgrade Mode

Select voice menu option 17 to choose firmware upgrade mode among the following three options: 1) always check, 2) check when pre/suffix changes, and 3) never upgrade

CONFIGURING HT–286WITH WEB BROWSER

HT–286 has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow users to configure the HT–286 through a Web browser such as Microsoft’s IE and AOL’s Netscape.

ACCESS THE WEB CONFIGURATION MENU

HandyTone-286 has embedded HTML pages that allows a user to configure the HandyTone-286 through a Web browser.

1.Find the IP address of the HT–286 using voice prompt menu option 02.

2.Access the HT–286 Web Configuration page by the following URI via WAN port: http://HandyTone-IP-Address (the HandyTone-IP-Address is the IP address for the HT–286).

NOTE: If using a web browser to enter the configuration page, strip the leading “0”s because the browser

will parse in octet. (i.e. if the IP address is: 192.168.001.014, please type in: 192.168.1.14).

END USER CONFIGURATION

Once the HTTP request is entered and sent from a Web browser, the user will see a log in screen. There are two default passwords for the login page:

	User Level:	Password:	Web pages allowed:
	End User Level	123	Only Status and Basic Settings
	Administrator Level	admin	Browse all pages

Grandstream Networks, Inc.		HT–286 User Manual			Page 15 of 28
		Firmware 1.1.0.31		Last Updated: 1/2009