Grandstream Networks Configure Your HT-502, Power Cable WAN Port RJ-45 LAN Port RJ-45, Reset

CONFIGURE YOUR HT–502

Configuring your HT–502 and connecting the unit to the VoIP network is very simple. The HT–502 is easy to configure using the embedded GUI pages and the following five (5) steps outlined below. Examples of the GUI Interfaces can be downloaded from: http://www.grandstream.com/user_manuals/GUI/GUI_HT502.rar. Before you begin, please verify the contents of the HT–502 package.

EQUIPMENT PACKAGING

Unpack and check all accessories. Equipment included in the package:

•one 12V universal power adapter

•one Ethernet cable

•one device unit

•one HT502 stand

CONNECT YOUR ATA

First, familiarize yourself with the features of the HT–502. The HT–502 has two FXS ports. Each FXS port can have a separate SIP account. This is a key feature of HT–502. Both ports can make calls concurrently.

FIGURE 1: CONNECTING THE HT–502

HT-502	HT-502
Front View	Back View

Display LEDs	RJ-45 Ports Reset	Power	RJ-11 FXS Ports
(green)	10/100 Mbps	Supply	(Phone)
		(12V)

TABLE 1: DEFINITIONS OF THE HT–502 CONNECTORS

Power Cable

WAN Port (RJ-45)

LAN Port (RJ-45)

RESET

PHONE1 (RJ-11)

PHONE2 (RJ-11)

Power adapter connection

Connect to the internal LAN network or router.

Connect the LAN port with an Ethernet cable to your PC.

Factory Reset button. Press for 7 seconds to reset factory default settings.

FXS port to be connected to analog phones / fax machines.

FXS port to be connected to analog phones / fax machines.

There are five (5) LED buttons that help you manage the status of your HandyTone.

Grandstream Networks, Inc.	HT-502 User Manual	Page 5 of 35
	Firmware 1.0.0.39	Last Updated: 03/2007