Grandstream Networks HT-502 End User Password, Web Port, IP Address, Dhcp hostname, Dhcp domain

End User Password		Password to access the Web Configuration Menu. This field is case sensitive
		with a maximum length of 25 characters.
Web Port		By default, HTTP uses port 80. This field is for customizable web port.
Telnet Server		Default is set to YES.
IP Address		There are two modes to operate the HT–502:
		DHCP mode: all the field values for the Static IP mode are not used (even
		though they are still saved in the Flash memory.) The HT–502 acquires its IP
		address from the first DHCP server it discovers from the LAN it is connected.
		Using the PPPoE feature: set the PPPoE account settings. The HT–502 will
		establish a PPPoE session if any of the PPPoE fields is set.
		Static IP mode: configure the IP address, Subnet Mask, Default Router IP
		address, DNS Server 1 (primary), DNS Server 2 (secondary) fields. These fields
		are set to zero by default.
DHCP hostname		This option specifies the name of the client. This field is optional but may be
		required by some Internet Service Providers. Default is blank.
DHCP domain		This option specifies the domain name that client should use when resolving
		hostnames via the Domain Name System. Default is blank.
DHCP vendor class		Used by clients and servers to exchange vendor-specific information. Default is
ID		HT500.
PPPoE account ID		PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to
		Point Protocol over Ethernet) connection.
PPPoE password		PPPoE account password.
PPPoE	Service	This field is optional. If your ISP uses a service name for the PPPoE connection,
Name		enter the service name here. Default is blank.
Time Zone		Controls how the date/time is displayed according to the specified time zone.

Grandstream Networks, Inc.	HT-502 User Manual	Page 19 of 35
	Firmware 1.0.0.39	Last Updated: 03/2007