EFJohnson 7780 service manual Menu Commands, Menu Bar

Page 40

TRANSCEIVER PROGRAMMING

3.2.2PROGRAMMING RADIO WIDE PARAMETERS

1.To display the Radio Wide screens, click the Radio Wide button or select Window > Radio Wide Parameters in the menu bar (see Section 3.1.8).

2.Program the applicable information in these screens as described in Section 3.4.

3.2.3PROGRAMMING CONVENTIONAL CHANNELS

NOTE: If no conventional channels are programmed, skip this section.

1.Make sure the conventional system is displayed by selecting Window > Conventional in the menu bar.

2.If required, display the Conventional System programming screens by clicking the System button or selecting Window > Conventional System (see Section 3.1.8).

3.Program the conventional systems and channels as described in Section 3.5.

3.2.4PROGRAMMING SMARTNET AND SMARTZONE SYSTEMS

NOTE: If no SMARTNET or SmartZone systems are programmed, skip this section.

1.Make sure the desired SMARTNET or SmartZone system is displayed by selecting Window > SMARTNET/SmartZone in the menu bar.

2.If required, display the programming screens for that system by clicking the System button or selecting Window > SMARTNET/SmartZone System (see Section 3.1.8).

3.Program the SMARTNET/SmartZone system and talk groups as described in Section 3.6.

4.To program additional SMARTNET/SmartZone systems, add a new system as described in Section 3.1.10 and repeat Section 3.6.

3.2.5PROGRAMMING RADIO (DOWNLOADING FILE)

When all the required programming information has been entered in the various programming screens, the information can be programmed (downloaded) into the radio. When downloading a file, be sure that all connections between the computer and radio are secure, the radio is turned on, and the proper serial port is selected (see Section 3.3.1). Then proceed as follows:

1.Select Download from the menu bar and then the file type to be transferred (programming or scrambling).

If no file is currently loaded, a dialog box appears to select the desired file.

If a file is already loaded when Download is selected, the current file is transferred to the radio.

2.Repeat for the other file type (if required).

NOTE: The information which follows (Sections 3.3- 3.6) provides detailed descriptions of the parameters that are displayed in the various PCTrunk screens.

3.3 MENU COMMANDS

Menu Bar

3.3.1 FILE MENU

New - Creates a programming file with default param- eters for the selected frequency range.

November 1999

 

Part No. 001-7780-500

3-4

Image 40
Contents 7780 Page Page Table of Contents Table of Contents CONT’D List of Tables List of FiguresGeneral Information Scope of Manual Equipment DescriptionAccessories Factory Customer ServicePart Number Breakdown Transceiver IdentificationAccessories AccessoryToll-Free 800 Factory ReturnsInternet Home Intrinsically Safe Information Replacement PartsDefinitions Temperature Code T3C Possible Ignition SourcesIntrinsically Safe and Nonincendive Ratings Classification of Hazardous Areas and AtmospheresAccessing PC Boards Material ClassificationTypical Hazard Group Class Area ClassificationRemoving RF Unit Removing Logic UnitSpecifications GeneralTransceiver Operation FeaturesControls and Display TX Indicator Red Indicates when the transmitter is keyed Low-Battery Indicator AmberFront Panel Keys Full Keypad Model DisplayDisplay Turning Power on and Setting Volume Option SwitchesGeneral Operation BacklightFunction Conv Option Switch FunctionsSee Tone ENABLE/DISABLE ScanningConventional and SMARTNET/ Smartzone Operation Display Mode Selection Conventional FeaturesMonitoring Before Transmitting Busy Channel Lockout Monitor ModeCall Guard Squelch Penalty Timer Conversation TimerPower Output Select Conventional Mode ScanningPriority Channel Sampling DTMF/ANI Signaling Standard Conventional CallsSMARTNET/SMARTZONE Features Viewing Unit IDStandard Group Calls Enhanced Private Conversation CallsTransceiver Operation Private Conversation II Calls Telephone Calls Call Alert Messaging Emergency Alarm and CallSending Status Conditions SMARTNET/SMARTZONE Scanning Failsoft OperationDynamic Regrouping Supervisory Tones Menu Description Keypad ProgrammingZone Change Parameter System Parameters Channel Change ParameterChannel Parameters Programming Setup Pctrunk Software InstallationTransceiver Programming Computer DescriptionConnecting RPI to Computer and Transceiver Starting and ExitingProgramming File Types Help FilesScreen Pop-Up Buttons and File Size Indicator Programming ProcedureFile Size Indication Creating and Displaying SystemsMenu Commands Menu BarRadio Type Menu Download Menu Upload MenuSystems Menu Window MenuDefaults RADIO-WIDE Parameter ScreensBand ZonesRadio Wide Scan List Radio-Wide Scan List ScreenModify List Screen Assign Function ButtonsRADIO-WIDE Conventional Screen RADIO-WIDE SMARTNET/SMARTZONE ScreenFull Spectrum CC Scan Hot DtmfAdjustable Parameters RADIO-WIDE Portable Options ScreenProgramming Conventional Systems and Channels Conventional System General ScreenTimers Conventional System Modify Scan List ScreenKeypad Editing Scan List ButtonSetting UP Conventional Channels Scan TimersPriority Channel Selection Conventional Channel Screen Parameters Selected ChannelTransmit Power SignalingChannel Type Tx Time-OutRestricted Access Time-Out TimerISW Delay Time Splinter ChannelsSMARTNET/SMARTZONE System Other ID’S Screen SMARTNET/SMARTZONE System Phone Interconnect ScreenPhone Interconnect Private CallSMARTNET/SMARTZONE System Emergency Settings Screen Emergency AlarmSMARTNET/SMARTZONE System Talk Groups Screen Failsoft ChannelTrunking Phone List Screen SMARTNET/SMARTZONE System Lists ScreensMessage Aliasing Screen Announcement Groups Screen Control Channels ScreenTrunking Call List Screen Status Aliasing Screen Setting UP SMARTNET/SMART- Zone ChannelsSMARTNET/SMARTZONE Channel Screen Parameters SMARTNET/SmartZone Channel Screen Other Screen ParametersCall Guard CTCSS/DCS Codes and Tones Recommended Tone Call Guard Codes FreqMHz Channels MHz Channels MHz Channels MHz Channels MHz Channels MHz Channels Power Switching and Regulation Power SwitchingCircuit Description Synthesizer DescriptionSynthesizer Chip IC1 VCO and Tcxo ModulationCharge Pump Q1, Q2, Loop Filter RF Amplifier Q1, First Mixer Q2 Receiver Circuit DescriptionIf Amplifier Q2, LIMITER/DETECTOR IC3 Antenna Switch and LOW-PASS Filter Squelch Circuit IC4A/B, IC5ATransmitter Description Amplifier Q9, Driver Q8Control Logic and Display Receive Audio ProcessingMicroprocessor IC306 Pin Descriptions Pin Port Name Input or Description Active High OutputHvfulswlrq Receive and Transmit Data Processing Audio Amplifier IC104-IC106Receive Data FILTER/DETECTOR IC102A/B, IC107A/B Transmit Data Filter IC206B/ IC206A Transmit Audio ProcessingLOW-PASS Filter IC205A/B Smartnet Data ProcessingBattery Pack and Charger Information Battery PackPower Setting Operating Time Function Fahrenheit CelsiusBattery Pack and Charger Information Alignment Procedure and Performance Tests Test SetupTune Software Hqhudo Mm/3/32 Mm/1/8 Phone JackPreliminary Setup Main Pctune ScreenTransmit Frequency and Power Transmit Power Adjustment ScreenHigh Power Level = 3.0 watts Low Power Level = 1.0 watt Modulation BalanceSquelch Adjust Rssi AdjustAudio Deviation Data DeviationPerformance Tests Receiver Performance TestsPower Output Transmitter Performance TestsTransmit Frequency Transmit ModulationThis page intentionally left blank Parts List Display AssemblyChassis Parts Ref No DescriptionKEY Assembly Display AssemblyKEY Assembly If AssemblyIf Assembly PLL Assembly RF UnitRF Unit NJM2904V-TE1 IC RF Unit Logic Unit Logic Unit TDA7233D IC Logic Unit 200K ERJ3GE MP35 MP18 MP25 KEY Front Panel EP2EP1 MP32 MP33 MP27 MP34 MP28 MP29 MP23 MP22 MP30 MP24 MP26 MP18 PLL Board TOP View Schematic Diagrams and Component LayoutsPLL Board Bottom View If Board TOP View If Board Bottom ViewTransceiver Block Diagram RF UnitRF Board TOP View MICRF Board Schematic If AMPLogic Board TOP View HD1Logic Board Schematic Receive Audio ProcessingDisplay Board Bottom View GND KEYR3 KEYR2 KEYR1 KEYR0 KEYS3 KEYS2 KEYS1 KEYS0 GNDDisplay Board Schematic DS3 DS4 DS5KEY Board Front View KEY Board Back ViewKEY Board Schematic S S R R R RScan HC2 HC7 HC8 HC3 Schematic Diagrams and Component Layouts