EFJohnson 7780 service manual Status Aliasing Screen, Setting UP SMARTNET/SMART- Zone Channels

Page 56

TRANSCEIVER PROGRAMMING

4.Repeat the preceding steps for the other scan lists if applicable.

Status Aliasing Screen

This screen is shown above, and it programs the alias for each of up to eight status conditions that can be sent. The meaning of each status number is defined by the system manager. Refer to Section 2.5.9 for more information.

To edit this list, click the Status Aliasing tab and then the “Modify List” button on the right side. The following information is then programmed in the dialog box that is displayed:

Status Number - The scroll bars to the right of this box select the status number that is to be edited.

Status Alias - Programs up to 8 characters that iden- tify the status. This identification is displayed when the user selects a status condition.

3.6.8SETTING UP SMARTNET/SMART- ZONE CHANNELS

The SMARTNET/SmartZone Channel screen shown in Figure 3-4 is displayed when the SMARTNET or SmartZone channel type is selected. This screen programs unique channel parameters and also assigns channels to the selectable zones displayed by the transceiver.

The general procedure for setting up a SMARTNET/SmartZone channel is as follows. Refer to the descriptions which follow this procedure for information on SMARTNET/SmartZone Channel screen parameters.

1.Make sure that the desired zone is selected in the Zone box.

2.Select the channel number in the Channels Index box which is to be programmed with the channel.

3.To set up a SMARTNET channel, select “SMARTNET” as the channel type, and to set up a SmartZone channel, select “SmartZone”.

4.Click the Modify button to display the dialog box shown in the lower part of Figure 3-4. This box programs the alias (tag) that is displayed when it is selected.

5.Program the other parameters in the main part of the screen (see information which follows).

3.6.9SMARTNET/SMARTZONE CHANNEL SCREEN PARAMETERS

The following parameters are programmed in the SMARTNET/SmartZone channel screen shown in Figure 3-4.

Selected Channel

Zone Box - Clicking the arrow to the right of this box displays the available zones. Click on a zone to select it. Zones and zone aliases are set up on the Radio- Wide General screen described in Section 3.4.2.

Channel Index Box - Displays the channels in the selected zone. The channel type is selected by the Channel Type box below it.

- Displays the screen shown in the lower part of Figure 3-4. The parameters programmed in this screen are as follows:

Channel - Selects the channel to be edited.

Alias - Programs the identification that is displayed when the channel is selected. Up to 8 characters can be programmed.

Transmit - Not programmable because the transmit frequency is dynamically assigned over the air (“Trunked” is always displayed).

Receive - Dynamically assigned like the transmit frequency.

November 1999

 

Part No. 001-7780-500

3-20

Page 55 Page 57
Image 56
Page 55 Page 57
Contents 7780 Page Page Table of Contents Table of Contents CONT’D List of Tables List of FiguresGeneral Information Scope of Manual Equipment DescriptionAccessories Factory Customer ServicePart Number Breakdown Transceiver IdentificationAccessories AccessoryToll-Free 800 Factory ReturnsDefinitions Replacement PartsInternet Home Intrinsically Safe Information Temperature Code T3C Possible Ignition SourcesIntrinsically Safe and Nonincendive Ratings Classification of Hazardous Areas and AtmospheresAccessing PC Boards Material ClassificationTypical Hazard Group Class Area ClassificationRemoving RF Unit Removing Logic UnitSpecifications GeneralControls and Display FeaturesTransceiver Operation TX Indicator Red Indicates when the transmitter is keyed Low-Battery Indicator AmberDisplay DisplayFront Panel Keys Full Keypad Model Turning Power on and Setting Volume Option SwitchesGeneral Operation BacklightSee Option Switch FunctionsFunction Conv Tone ENABLE/DISABLE ScanningConventional and SMARTNET/ Smartzone Operation Monitoring Before Transmitting Conventional FeaturesDisplay Mode Selection Call Guard Squelch Monitor ModeBusy Channel Lockout Penalty Timer Conversation TimerPower Output Select Conventional Mode ScanningPriority Channel Sampling DTMF/ANI Signaling Standard Conventional CallsSMARTNET/SMARTZONE Features Viewing Unit IDStandard Group Calls Enhanced Private Conversation CallsTransceiver Operation Private Conversation II Calls Telephone Calls Call Alert Sending Status Conditions Emergency Alarm and CallMessaging Dynamic Regrouping Failsoft OperationSMARTNET/SMARTZONE Scanning Supervisory Tones Zone Change Parameter Keypad ProgrammingMenu Description Channel Parameters Channel Change ParameterSystem Parameters Programming Setup Pctrunk Software InstallationTransceiver Programming Computer DescriptionConnecting RPI to Computer and Transceiver Starting and ExitingProgramming File Types Help FilesScreen Pop-Up Buttons and File Size Indicator Programming ProcedureFile Size Indication Creating and Displaying SystemsMenu Commands Menu BarRadio Type Menu Download Menu Upload MenuSystems Menu Window MenuDefaults RADIO-WIDE Parameter ScreensBand ZonesRadio Wide Scan List Radio-Wide Scan List ScreenModify List Screen Assign Function ButtonsRADIO-WIDE Conventional Screen RADIO-WIDE SMARTNET/SMARTZONE ScreenFull Spectrum CC Scan Hot DtmfAdjustable Parameters RADIO-WIDE Portable Options ScreenProgramming Conventional Systems and Channels Conventional System General ScreenTimers Conventional System Modify Scan List ScreenKeypad Editing Scan List ButtonPriority Channel Selection Scan TimersSetting UP Conventional Channels Conventional Channel Screen Parameters Selected ChannelTransmit Power SignalingChannel Type Tx Time-OutRestricted Access Time-Out TimerISW Delay Time Splinter ChannelsSMARTNET/SMARTZONE System Other ID’S Screen SMARTNET/SMARTZONE System Phone Interconnect ScreenPhone Interconnect Private CallSMARTNET/SMARTZONE System Emergency Settings Screen Emergency AlarmSMARTNET/SMARTZONE System Talk Groups Screen Failsoft ChannelMessage Aliasing Screen SMARTNET/SMARTZONE System Lists ScreensTrunking Phone List Screen Announcement Groups Screen Control Channels ScreenTrunking Call List Screen SMARTNET/SMARTZONE Channel Screen Parameters Setting UP SMARTNET/SMART- Zone ChannelsStatus Aliasing Screen SMARTNET/SmartZone Channel Screen Other Screen ParametersCall Guard CTCSS/DCS Codes and Tones Recommended Tone Call Guard Codes FreqMHz Channels MHz Channels MHz Channels MHz Channels MHz Channels MHz Channels Power Switching and Regulation Power SwitchingCircuit Description Synthesizer DescriptionCharge Pump Q1, Q2, Loop Filter VCO and Tcxo ModulationSynthesizer Chip IC1 If Amplifier Q2, LIMITER/DETECTOR IC3 Receiver Circuit DescriptionRF Amplifier Q1, First Mixer Q2 Antenna Switch and LOW-PASS Filter Squelch Circuit IC4A/B, IC5ATransmitter Description Amplifier Q9, Driver Q8Control Logic and Display Receive Audio ProcessingMicroprocessor IC306 Pin Descriptions Pin Port Name Input or Description Active High OutputHvfulswlrq Receive Data FILTER/DETECTOR IC102A/B, IC107A/B Audio Amplifier IC104-IC106Receive and Transmit Data Processing Transmit Data Filter IC206B/ IC206A Transmit Audio ProcessingLOW-PASS Filter IC205A/B Smartnet Data ProcessingBattery Pack and Charger Information Battery PackPower Setting Operating Time Function Fahrenheit CelsiusBattery Pack and Charger Information Alignment Procedure and Performance Tests Test SetupTune Software Hqhudo Mm/3/32 Mm/1/8 Phone JackPreliminary Setup Main Pctune ScreenTransmit Frequency and Power Transmit Power Adjustment ScreenHigh Power Level = 3.0 watts Low Power Level = 1.0 watt Modulation BalanceSquelch Adjust Rssi AdjustAudio Deviation Data DeviationPerformance Tests Receiver Performance TestsPower Output Transmitter Performance TestsTransmit Frequency Transmit ModulationThis page intentionally left blank Parts List Display AssemblyChassis Parts Ref No DescriptionKEY Assembly Display AssemblyIf Assembly If AssemblyKEY Assembly PLL Assembly RF UnitRF Unit NJM2904V-TE1 IC RF Unit Logic Unit Logic Unit TDA7233D IC Logic Unit 200K ERJ3GE MP35 MP18 MP25 KEY Front Panel EP2EP1 MP32 MP33 MP27 MP34 MP28 MP29 MP23 MP22 MP30 MP24 MP26 MP18 PLL Board Bottom View Schematic Diagrams and Component LayoutsPLL Board TOP View If Board TOP View If Board Bottom ViewTransceiver Block Diagram RF UnitRF Board TOP View MICRF Board Schematic If AMPLogic Board TOP View HD1Logic Board Schematic Receive Audio ProcessingDisplay Board Bottom View GND KEYR3 KEYR2 KEYR1 KEYR0 KEYS3 KEYS2 KEYS1 KEYS0 GNDDisplay Board Schematic DS3 DS4 DS5KEY Board Front View KEY Board Back ViewKEY Board Schematic S S R R R RScan HC2 HC7 HC8 HC3 Schematic Diagrams and Component Layouts
Top Page Image Contents