Icom IC-R20 instruction manual Auto-memory write scan, During auto-memory write scanning

■Auto-memory write scan

This scan is useful for searching a specified frequency range and automatically storing busy frequencies into memory channels. The auto-memory write scan is performed with any VFO scan types (ALL, BAND, PROG).

qSelect VFO mode with [VFO MHz].

wPush and hold [MODE SCAN] to enter scanning type se-

lection condition.

eRotate [R-DIAL]to select the desired scanning type.

•“ALL” for full scan; “BAND” for band scan, “PROG-xx” for pro- grammed scan (xx= 0 to 24; programmed scan edges numbers only displayed)

rRelease [MODE SCAN] to start the scan.

tPush [MR S.MW] to turn the automatic memory write func- tion ON and OFF.

SCAN OPERATION 7

DDuring auto-memory write scanning:

•When a signal is received, scan pauses and the frequency

is stored into auto-memory write channel group (å 000 –

å 199).

- 2 short beeps sound when stored.

•Scan resumes after frequency storing.

•When all channels are stored, the scan is cancelled auto- matically and 1 long beep sounds.

D Recalling the stored frequencies:	7
qPush [MR S.MW] several times to select the auto-memory

write channel group.

-DUP TSQL AFC

MODE FM ANL

439 875

PSKIP

√ å 001

•“µ ” indicator blinks.

[R-DIAL]

MODE

SCAN

MR

S.MW

•During auto memory write scan

-DUP TSQL AFC MODE FM ANL

148 800

PSKIP

õ 001

“µ ” indicator blinks during auto memory write scan.

“ å ” appears when auto memory

write channel group is selected.

wRotate [R-DIAL]to select the desired channel.

DClearing the stored frequencies:

qSelect the auto-memory write channel group.

wPush [5 SKIP] for 1 sec. to clear the all channels contents.

• 1 short and 1 long beeps sound.

NOTE: The auto-memory write channel contents CANNOT

be cleared by an independent channel. Thus it is a good

idea to copy the contents into regular memory channel.

yPush [DUALWATCH] to stop the scan.

38