Icom IC-R20 instruction manual Partial reset

11 OTHER FUNCTIONS

■ Partial reset
	AT POWER ON

If you want to initialize the operating conditions (VFO fre- quency, VFO settings, set mode contents) without clearing the memory contents, a partial resetting function is available for the receiver.

➥While pushing [VFO MHz], turn the power ON to partially reset the receiver.

■ All reset
	AT POWER ON

The function display may occasionally display erroneous in- formation (e.g. when first applying power). This may be caused externally by static electricity or by other factors.

If this problem occurs, turn power OFF. After waiting for a few seconds, turn power ON again. If the problem persists, per- form the following procedure.

• Partial resetting is also available. See left for details.

DUALWATCH	MAIN/SUB		POWER	POWER
BAND	VFO	MODE	MR	VFO
	MHz	SCAN	S.MW	MHz

DIAL.SEL SWEEP CENTER

1	2	3	SCOPE
T-SCAN	SKIP	M.N
4	5	6	0 AFC
TONE	SET	TS
7	8	9	LOCK
ATT	RF GAIN	IC Recorder
			REC

-DUP TSQL AFC MODE FM ANL

146 010

PSKIP

√

*The appearing frqeuency is different according to re- ceiver version.

IMPORTANT!:

Resetting the receiver (All reset) CLEARS all memory in-

formation and initializes all values in the receiver, includ- ing TV channel skip setting.

➥While pushing [VFO MHz] and [MR S.MW], turn the power ON to reset the CPU.

DUALWATCH	MAIN/SUB		POWER
BAND	VFO	MODE	MR
	MHz	SCAN	S.MW

DIAL.SEL SWEEP CENTER

1 2 3 SCOPE

T-SCAN SKIP M.N

ALL-RESET

POWER
MR
S.MW
VFO		-DUP TSQL AFC
MHz
	MODE FM ANL

4	5	6	0 AFC	146 010
TONE	SET	TS
7	8	9	LOCK
ATT	RF GAIN	IC Recorder		PSKIP

REC √

*The appearing frqeuency is different according to the receiver version.

67