Icom IC-R20 instruction manual Skip channel/frequency setting

7 SCAN OPERATION

■Skip channel/frequency setting

Memory channels can be set to be skipped for memory skip scan. In addition, memory channels can be set to be skipped for both memory skip scan and frequency skip scan. These are useful to speed up the scan interval.

qSelect a memory channel:

➥Push [MR S.MW] to select memory mode.

➥Rotate [R-DIAL]to select the desired channel to be a

skip channel/frequency.

wPush [MR S.MW] for 1 sec. to enter the select memory write condition.

ePush [8 SET] several times to select “SKIP.”

•While pushing [8 SET], rotating [R-DIAL]can also select “SKIP.”

	FM
[R-DIAL]	146..010µ 012
	-BANK-:----
	-BNAME:
	-MNAME:
	-SKIP-:OFF
	>CLEAR
	SET
MR	After 8 is pushed
	several times.
S.MW
SET	-MNAME:
8	>SKIP-:OFF
	>CLEAR

39

rRotate [R-DIAL]to select the skip condition from “SKIP,” “PSKIP” or “OFF” for the selected channel.

•PSKIP : The channel is skipped during memory/bank scan and the programmed frequency is skipped during VFO scan, such as programmed scan.

• SKIP	: The channel is skipped during memory or bank scan.
• OFF	: The channel or programmed frequency is scanned dur-
	ing any scan.

tPush [MR S.MW] for 1 sec. to store the skip condition into the memory.

•“SKIP” or “PSKIP” indicator appears, according to the skip se- lection in the step r.

• Skip channel setting				• Program skip setting
-DUP TSQL			AFC			-DUP TSQL		AFC
MODE	FM ANL			MODE			FM ANL
145 700				145 700
B:GROUP1		PSKIP		B:GROUP1				PSKIP
√	µ				√		µ	003
			033
ATT				ATT
	“SKIP” appears						“PSKIP” appears

✔CONVENIENT!

Also the skip setting can be set with the following operation for easy setting.

qSelect the desired memory channel to be set as a skip channel/frequency.

wWhile pushing [5 SKIP], rotate [R-DIAL]to select the skip condition from “PSKIP,” “SKIP” and “OFF (no indication).”