Uniden DG72 quick start Installing, Wall Installation, Base

Page 10

Be careful not to insert the mounting screws

into possible electrical hazards such as cables, wiring, or pipes.

INSTALLING

AND ADJUSTING YOUR PHONE

WALL INSTALLATION

1.Insert two mounting screws (with their appropriate anchoring device) into the wall 100mm apart. Allow about 5mm between the wall and screw heads for mounting the phone.

2.Snap the desktop/wall mount adaptor into the bottom of the base as shown.

3.Plug the AC adaptor cord into the 9V DC input jack on the back of

the base.

4.Put the AC adaptor cord inside the wall mount adaptor. Plug the AC adaptor into a standard 240V AC wall outlet.

Image 10

Contents DG72 Choosing the best location for your telephone Installation & SafetyInstructions Start To Make a Call Installing the Handset BatteriesAdjusting the Handset Earpiece Volume To Hang UpContents Base Microphone Power LED Use/Hold/Mute LED Charge LED Battery Compartment Handset Antenna Talk ButtonTalk LED Battery Low LED Controls & FunctionsWait Welcome FeaturesIntroduction Enhanced Memory Dial Locations 16 digits maximum per memoryRegistration Card Included in Your PackageIntroduction Memory Stickers Wall Mounting ScrewsWall Installation InstallingBase Installation & Adjusting Retainer holds the handset in placeCharging the Battery Pack Installing & Charging the Battery PackInstalling the Battery Pack Initial battery chargingHandset earpiece volume Adjusting Ringer ToneHandset ringer volume Volume will remain on the same setting when you hang upAutomatic Digital Code Security Installing the BeltclipTo reset the digital security code To attach the beltclipMaking and Receiving Calls UsingUsing Your Phone Basic phone operationUsing the c.wait or flash key Using the c.wait featureUsing the Flash Key Call WaitingRoom Monitor MuteIntercom Call TransferRedial/p to insert a pause Transferring a call from the Base Unit to the HandsetEntering Handset Memory Numbers Press mem againChain Dialing Using the memory location featuresDialing a Number in Memory From the HandsetFrom the Base Unit Travelling OUT-OF-RANGEPabx Connection Speaker on the base unitQuick Reference Chart TroubleshootingHandset rechargeable battery pack may need Second to reset the systemCharging contacts may need to be cleaned That they are pushed in firmly until they clickWarrantor WarrantyWarranty Uniden New Zealand LimitedThank YOU for Purchasing a Uniden Phone