Uniden DG72 Transferring a call from the Base Unit to the Handset, Redial/p to insert a pause

!

The pause button count as one digit. Pressing

redial/p more than once increases the length of pause between numbers.

2. At the base unit, press int to answer the page. An intercom link is now established between the handset and the base unit. Speak into the microphone.

3.Press speaker on the base unit to establish communications between the calling party.

▼Transferring a call from the Base Unit to the Handset

1.	During a call, press int	on the base unit, the call is placed on hold automatically
	and the handset is paged. (If there is no answer press int again to return to the
	call on hold).
2.	At the handset, press int	to answer the page. An intercom link is now established
	between base unit the and the handset. Speak into the microphone.
3.	Press talk on the handset to establish communications.

STORING A PHONE NUMBER IN MEMORY

▼Entering Handset Memory Numbers

1.Remove the handset from the base.

2.Press mem . The talk LED blinks.

3.	Enter the phone number, up to 16 digits.
	If a pause is needed during dialing	talk
	to access long distance service, press
	redial/p to insert a pause.	redial/p	mem
4.	Press mem again.
5.	Enter the two digit memory location 0	1 - 2	0 on the keypad. A tone
	indicates that the number is stored.

▼Entering Base Unit Memory Numbers

1.Press mem . The in use/hold/mute LED blinks.

2. Enter the phone number, up to 16 digits.			mute int	mem hold
If a pause is needed during dialing				mem
			flash	redial/p
to access long distance service, press				vol
redial/p to insert a pause.			charge	redial/p
3. Press	mem	again.	in use/hold/mute	speaker
			power
4. Enter the two digit memory location				inuse/hold/mute
0	1 - 2	0 on the keypad. A tone
indicates that the number is stored.

14