Call Waiting, Hold, Using the c.wait feature

The c.wait procedure toggles between the incoming and original call (vice versa). The c.wait procedure will drop the current call and pick up the incoming call or call on hold.

The flash + 2 call waiting procedure toggles between the incoming and original call (and visa versa).

The flash + 1 procedure will drop the current call connection and pick up the incoming call on hold.

In New Zealand you must subscribe to Telecom’s Call Waiting Service before you can use this feature.

CALL WAITING

▼For Australian Version

Using the c.wait feature

Please call your local telephone service provider to check the availability of this service in your area.

1.While talking you hear the Call Waiting signal.

2.Press c.wait button.

3.The existing call is placed on hold.

c.wait

4. Talk to the second caller.

5. Press talk button to end the current call.

6. The phone will ring back indicating that

flash

the first caller is still on hold.

7.Press talk button to answer this call.

8.Press talk button to end the call.

Using the Flash Key

To access Telstra’s Call Waiting Service, you can either use the c.wait button or

the	flash	key.
1.	While talking you hear the Call Waiting signal.
2.	Press	flash then 2 to switch call and put the current call on hold.
3.	To switch back to your original call, press flash then 1 .

▼For New Zealand Version

Using the c.wait or flash key

1.While talking you hear the Call Waiting beep signal.

2. Press c.wait or the flash key. This feature sends a 600ms timed “hook-flash” on the telephone line for accessing services such as Call Waiting etc.

HOLD

To use the hold feature during a conversation,
press hold . Both parties will not be able to hear.
To disable the hold feature, press hold again.	hold