Uniden DECT4086-5, DECT4086-2 Using Your Phone, Working with Two Lines, Assigning a primary line

Page 22

Using Your Phone

Working with Two Lines

When performing common tasks, you can let the station use the primary line, or you can manually choose a particular line for each task. Using the primary line makes common tasks much simpler, but you will need to assign a primary line to each station (see below).

	If you want to...	From a handset	From a handset	From the base
			speakerphone	speakerphone

make a call: Dial the number, then

- with the primary line Press Talk/flash. Press speaker.

- by choosing a line Press Line1 or Line2.*

answer a call

When a call comes in, the soft keys blink to tell you which line is ringing.

- with the primary line	Press Talk/flash.						Press speaker.
- by choosing a line	Press the soft key for the line you want to answer.*

hang up	Press End or return the handset to								Press speaker.
	the cradle.
switch between the	Press speaker.								Not available
speaker and earpiece
	Press intercom/hold; the soft key blinks to remind
put a call on hold	you the line is on hold. To return to the call, press the
	soft key (		Line1		or	Line2		) for the holding line.

switch lines during a	Press the soft key for the other line; the current call
	is automatically put on hold (see above). To return to
call (automatic hold)	the call, press the soft key for the holding line.
mute the microphone	Press	Mute		.					Press mute/exit.
during a call	Press again to turn the microphone back on.
mute the ringer for	While the phone is ringing,
this call only	press End.								press mute/exit.

* On the handset, press Speaker to switch to the speakerphone.

Assigning a primary line

You can assign a primary line to each station; the station connects to its primary line whenever it goes off hook (that is, when you press Talk/flash or Speaker). Whenever you want, you can bypass the

20

Image 22

Contents You might also find DECT4086 Series Users GuideWhats in the box? Phone NumberImportant Safety Instructions Whats in the manual?Set Up the Base Installing Your PhoneAttach the stand Connect the power and telephone cords Here rstInstall the battery Setup the HandsetsPlace the phone on the wall Charge the battery TryUnavailable Test the ConnectionTest Line Check orChanging from Tone to Pulse Dialing Parts of the Base Getting to Know Your PhoneBase keys and how they work Standby or during a call open the Caller ID list Increase the speaker volumeKey name During text entry move the cursor to the rightParts of the Handset Handset keys and how they workStandby page another station using the intercom Switch a normal call to the speakerphone and backStandby open the redial list On the handset Reading the DisplaysOn the base Base Icon Handset Icon What it meansAnswering system status icons Answering system is off it will not answer the phoneSoft keys in the main menu Using the Soft KeysSoft keys with the phone in standby On the baseCommon soft key descriptions Entering Text on Your Phone Using the Menus To close the menuMenu option Use it to Menu option Use it to Display. Enter any name up to 10 charactersSpecial Feature Menus Working with Two Lines Using Your PhoneAssigning a primary line Conferencing two lines together Change When On the base On a handset Changing the VolumeUsing the Caller ID and Redial Lists Medium, or HighCaller ID and redial menu options Using the listsDialing from the CID or redial list Store into PBUsing Seven-Digit Dialing Using Call WaitingUsing an Optional Headset Finding a Lost HandsetCreating a new entry Using the PhonebookSetting Up Your Phonebook Edit NameEditing an existing entry Chain Dialing One accessory handset to use this multi-station featurePhonebook Menu Options Copy AllUsing Multi-Station Conference Calling Using Multi-station FeaturesExpanding Your Phone Using Call Transfer Using Privacy ModeFrom the base From a handset Using the Intercom Using the Alarm Feature Using Special FeaturesUsing Do Not Disturb Setting an alarmWhen an alarm rings TuesdayUsing Voice Message Notification Resetting the voice message indicatorSwitch between the pre-recorded greeting and your greeting Using the Answering SystemSetting Up Your Answering System Recording your outgoing messageYour new messages. To mute the alert without listening Ans. Setup menu optionsDelete your greeting To your messages, press any key on the baseIcon Command Name Handset key Base key Accessing your system from a handset remote operationHow to operate your answering system Getting Your MessagesScreening Your Calls Dialing in to your system Using the System While Youre Away from HomeProgramming a security code Remember to make a note of your new security codeIf… Try… Solving ProblemsSays Unavailable Announce Only see Weak or Hard To Hear Audio Noise or Static onO The lLineStatus and keep the battery charged Here are some hints for when the static isHandset Setup , then select T-coil On 1 handset or in 1 locationDo you have the base the handset is registered to? Yes Resetting and Registering HandsetsRegistering a handset Does the handset fit in the base cradle? YesHandling Liquid Damage Handset BasePS-0034 PS-0035 Important InformationBase Charger 120V AC, 60 HzCompliance Information FCC Part 15 information FCC Part 15.105bRF exposure information Terminal equipment Radio equipment574,727 581,598 606,598 650,790 660,269 663,981 671,248