Uniden DECT4086-6, DECT4086-2, DECT4086-4, DECT4086-3 manual Handling Liquid Damage, Handset Base

Page 47

In about 30 seconds, the handset display should say Registration Complete. Press Talk/flash and make sure you get a dial tone.

If...	Try...

- you don't hear a dial tone	Making sure the handset is fully
- the display says Registration Failed	charged, then start over at step 1.

To register a handset to a different base, see the section "Expanding Your Phone" in the user's guide for the other base.

Handling Liquid Damage

Moisture and liquid can damage your cordless phone.

If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.

If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow these steps:

Handset		Base

1.	Remove the battery cover and disconnect the	1.	Disconnect the AC
	battery.		adapter to cut off the
2.	Let dry for at least 3 days with the battery		power.
	disconnected and the cover off for ventilation.	2.	Disconnect the
3.	After the handset dries, reconnect the battery		telephone cord.
	pack and replace the cover. Recharge the	3.	Let dry for at least 3 days
	battery fully (15-20 hours) before using.		before reconnecting.

IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION! DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven.

45

Image 47

Contents Phone Number DECT4086 Series Users GuideWhats in the box? You might also findWhats in the manual? Important Safety InstructionsAttach the stand Installing Your PhoneSet Up the Base Here rst Connect the power and telephone cordsPlace the phone on the wall Setup the HandsetsInstall the battery Try Charge the batteryCheck or Test the ConnectionTest Line UnavailableChanging from Tone to Pulse Dialing Base keys and how they work Getting to Know Your PhoneParts of the Base During text entry move the cursor to the right Increase the speaker volumeKey name Standby or during a call open the Caller ID listHandset keys and how they work Parts of the HandsetStandby open the redial list Switch a normal call to the speakerphone and backStandby page another station using the intercom Base Icon Handset Icon What it means Reading the DisplaysOn the base On the handsetAnswering system is off it will not answer the phone Answering system status iconsOn the base Using the Soft KeysSoft keys with the phone in standby Soft keys in the main menuCommon soft key descriptions Entering Text on Your Phone To close the menu Using the MenusMenu option Use it to Display. Enter any name up to 10 characters Menu option Use it toSpecial Feature Menus Assigning a primary line Using Your PhoneWorking with Two Lines Conferencing two lines together Medium, or High Changing the VolumeUsing the Caller ID and Redial Lists Change When On the base On a handsetStore into PB Using the listsDialing from the CID or redial list Caller ID and redial menu optionsUsing Call Waiting Using Seven-Digit DialingFinding a Lost Handset Using an Optional HeadsetEdit Name Using the PhonebookSetting Up Your Phonebook Creating a new entryEditing an existing entry Copy All One accessory handset to use this multi-station featurePhonebook Menu Options Chain DialingExpanding Your Phone Using Multi-station FeaturesUsing Multi-Station Conference Calling From the base From a handset Using Privacy ModeUsing Call Transfer Using the Intercom Setting an alarm Using Special FeaturesUsing Do Not Disturb Using the Alarm FeatureTuesday When an alarm ringsResetting the voice message indicator Using Voice Message NotificationRecording your outgoing message Using the Answering SystemSetting Up Your Answering System Switch between the pre-recorded greeting and your greetingTo your messages, press any key on the base Ans. Setup menu optionsDelete your greeting Your new messages. To mute the alert without listeningGetting Your Messages Accessing your system from a handset remote operationHow to operate your answering system Icon Command Name Handset key Base keyScreening Your Calls Remember to make a note of your new security code Using the System While Youre Away from HomeProgramming a security code Dialing in to your systemSays Unavailable Solving ProblemsIf… Try… Announce Only see Noise or Static onO The lLine Weak or Hard To Hear AudioOn 1 handset or in 1 location Here are some hints for when the static isHandset Setup , then select T-coil Status and keep the battery chargedDoes the handset fit in the base cradle? Yes Resetting and Registering HandsetsRegistering a handset Do you have the base the handset is registered to? YesHandset Base Handling Liquid Damage120V AC, 60 Hz Important InformationBase Charger PS-0034 PS-0035Compliance Information FCC Part 15.105b FCC Part 15 informationTerminal equipment Radio equipment RF exposure information574,727 581,598 606,598 650,790 660,269 663,981 671,248