Uniden DECT4086-5, DECT4086-2 manual Resetting and Registering Handsets, Registering a handset

Plug the DSL filter into the telephone wall jack and plug your phone’s base into the filter. Make a test call to make sure the noise is gone.

Resetting and Registering Handsets

If you are having trouble with a cordless handset or if you want to replace one, you need to clear the registration information from the base and the handset:

Do you have the base the handset is registered to?

	Yes		No
1.	Press and hold End and # until the	1.	Press and hold End and
	System Reset menu appears (about 5		# until the System Reset
	seconds).		menu appears (about 5
2.	Select Deregister HS. The display		seconds).
	lists all registered handsets.	2.	Select Base Unavailable.
3.	Select the handset you want to reset.	3.	When the handset asks you
4.	When the handset asks you to confirm,		to confirm, select Yes. (It
	select Yes. (It may ask you twice, just		may ask you twice, just to be
	to be sure.) The handset clears its		sure.) The handset deletes its
	information from the base and deletes		own link without contacting
	it own link to the base.		the base.

When you reset a handset (or if you buy a new one), that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it.

Registering a handset

Does the handset fit in the base cradle?

Yes		No
Place the	1.	On the base, open the menu and select Register
handset in		Handset. The display should say Handset
the base. The		Registering.
display should	2.	On the handset you want to register, press and hold
say Handset		# until the display says Handset Registering (about
Registering.		2 seconds).

44