Uniden DECT4086-6 manual Setup the Handsets, Place the phone on the wall, Install the battery

Page 5

Place the phone on the wall

Place the mounting slots over the pins on the wall plate, and slide the base

down to

lock it

into place.

(To telephone jack

for second line)

Setup the Handset(s)

Install the battery

1. Unpack all handsets, battery packs, and battery covers. If any handset has the battery cover already attached,

press in on the notch and slide the cover down and off.

2. Line up the battery pack connector with the jack inside the handset. (The battery connector will only fit one way.)

3. Push the battery pack connector in until it clicks into place. Tug gently on the wires to make sure the battery

pack is securely connected.

4. Place

the

cover

over the battery compartment and slide it up into place.

Image 5

Contents Whats in the box? DECT4086 Series Users GuideYou might also find Phone NumberWhats in the manual? Important Safety InstructionsAttach the stand Installing Your PhoneSet Up the Base Here rst Connect the power and telephone cordsPlace the phone on the wall Setup the HandsetsInstall the battery Try Charge the batteryTest Line Test the ConnectionUnavailable Check orChanging from Tone to Pulse Dialing Base keys and how they work Getting to Know Your PhoneParts of the Base Key name Increase the speaker volumeStandby or during a call open the Caller ID list During text entry move the cursor to the rightHandset keys and how they work Parts of the HandsetStandby open the redial list Switch a normal call to the speakerphone and backStandby page another station using the intercom On the base Reading the DisplaysOn the handset Base Icon Handset Icon What it meansAnswering system is off it will not answer the phone Answering system status iconsSoft keys with the phone in standby Using the Soft KeysSoft keys in the main menu On the baseCommon soft key descriptions Entering Text on Your Phone To close the menu Using the MenusMenu option Use it to Display. Enter any name up to 10 characters Menu option Use it toSpecial Feature Menus Assigning a primary line Using Your PhoneWorking with Two Lines Conferencing two lines together Using the Caller ID and Redial Lists Changing the VolumeChange When On the base On a handset Medium, or HighDialing from the CID or redial list Using the listsCaller ID and redial menu options Store into PBUsing Call Waiting Using Seven-Digit DialingFinding a Lost Handset Using an Optional HeadsetSetting Up Your Phonebook Using the PhonebookCreating a new entry Edit NameEditing an existing entry Phonebook Menu Options One accessory handset to use this multi-station featureChain Dialing Copy AllExpanding Your Phone Using Multi-station FeaturesUsing Multi-Station Conference Calling From the base From a handset Using Privacy ModeUsing Call Transfer Using the Intercom Using Do Not Disturb Using Special FeaturesUsing the Alarm Feature Setting an alarmTuesday When an alarm ringsResetting the voice message indicator Using Voice Message NotificationSetting Up Your Answering System Using the Answering SystemSwitch between the pre-recorded greeting and your greeting Recording your outgoing messageDelete your greeting Ans. Setup menu optionsYour new messages. To mute the alert without listening To your messages, press any key on the baseHow to operate your answering system Accessing your system from a handset remote operationIcon Command Name Handset key Base key Getting Your MessagesScreening Your Calls Programming a security code Using the System While Youre Away from HomeDialing in to your system Remember to make a note of your new security codeSays Unavailable Solving ProblemsIf… Try… Announce Only see Noise or Static onO The lLine Weak or Hard To Hear AudioHandset Setup , then select T-coil Here are some hints for when the static isStatus and keep the battery charged On 1 handset or in 1 locationRegistering a handset Resetting and Registering HandsetsDo you have the base the handset is registered to? Yes Does the handset fit in the base cradle? YesHandset Base Handling Liquid DamageBase Charger Important InformationPS-0034 PS-0035 120V AC, 60 HzCompliance Information FCC Part 15.105b FCC Part 15 informationTerminal equipment Radio equipment RF exposure information574,727 581,598 606,598 650,790 660,269 663,981 671,248