Uniden DECT4086-5, DECT4086-2, DECT4086-4 manual Connect the power and telephone cords, Here rst

Page 4

Connect the power and telephone cords

1.Connect the base AC adapter to the AC IN 7.8V jack and route the cord as shown:

For desktop use		For wall mount use
AC
7.IN	TEL
8V	TEL
	LINE
	1/2	TEL
		LINE2
		AC
		7.IN	TEL
		8V	TEL
			LINE
				1/2	TEL
					LINE2

2. Connect the included two-line telephone cord to the Tel Line 1/2

jack. If your phone company uses a	AC
separate phone jack for each line,	7.IN
separate phone jack for each line,	8V TEL
connect a standard telephone cord to	LINE	1/2	TEL
connect a standard telephone cord to		1/2

the Tel Line 2 jack. Route the cords			LINE2
the Tel Line 2 jack. Route the cords
as shown above.	Connect the
3. Connect the cord from Tel Line 1/2 to	telephone cord
a two-line phone jack.	here rst.
OR	IF you have a separate
If your phone company uses a	jack for line 2, connect
separate phone jack for each line,	another phone cord here.

connect the cord from Tel Line 1/2 to

the jack for line 1; then, connect the cord from Tel Line 2 the jack for line 2.

4. Plug the AC adapter into a standard 120 V AC power outlet.

Image 4

Contents DECT4086 Series Users Guide Whats in the box?You might also find Phone NumberImportant Safety Instructions Whats in the manual?Set Up the Base Installing Your PhoneAttach the stand Connect the power and telephone cords Here rstInstall the battery Setup the HandsetsPlace the phone on the wall Charge the battery TryTest the Connection Test LineUnavailable Check orChanging from Tone to Pulse Dialing Parts of the Base Getting to Know Your PhoneBase keys and how they work Increase the speaker volume Key nameStandby or during a call open the Caller ID list During text entry move the cursor to the rightParts of the Handset Handset keys and how they workStandby page another station using the intercom Switch a normal call to the speakerphone and backStandby open the redial list Reading the Displays On the baseOn the handset Base Icon Handset Icon What it meansAnswering system status icons Answering system is off it will not answer the phoneUsing the Soft Keys Soft keys with the phone in standbySoft keys in the main menu On the baseCommon soft key descriptions Entering Text on Your Phone Using the Menus To close the menuMenu option Use it to Menu option Use it to Display. Enter any name up to 10 charactersSpecial Feature Menus Working with Two Lines Using Your PhoneAssigning a primary line Conferencing two lines together Changing the Volume Using the Caller ID and Redial ListsChange When On the base On a handset Medium, or HighUsing the lists Dialing from the CID or redial listCaller ID and redial menu options Store into PBUsing Seven-Digit Dialing Using Call WaitingUsing an Optional Headset Finding a Lost HandsetUsing the Phonebook Setting Up Your PhonebookCreating a new entry Edit NameEditing an existing entry One accessory handset to use this multi-station feature Phonebook Menu OptionsChain Dialing Copy AllUsing Multi-Station Conference Calling Using Multi-station FeaturesExpanding Your Phone Using Call Transfer Using Privacy ModeFrom the base From a handset Using the Intercom Using Special Features Using Do Not DisturbUsing the Alarm Feature Setting an alarmWhen an alarm rings TuesdayUsing Voice Message Notification Resetting the voice message indicatorUsing the Answering System Setting Up Your Answering SystemSwitch between the pre-recorded greeting and your greeting Recording your outgoing messageAns. Setup menu options Delete your greetingYour new messages. To mute the alert without listening To your messages, press any key on the baseAccessing your system from a handset remote operation How to operate your answering systemIcon Command Name Handset key Base key Getting Your MessagesScreening Your Calls Using the System While Youre Away from Home Programming a security codeDialing in to your system Remember to make a note of your new security codeIf… Try… Solving ProblemsSays Unavailable Announce Only see Weak or Hard To Hear Audio Noise or Static onO The lLineHere are some hints for when the static is Handset Setup , then select T-coilStatus and keep the battery charged On 1 handset or in 1 locationResetting and Registering Handsets Registering a handsetDo you have the base the handset is registered to? Yes Does the handset fit in the base cradle? YesHandling Liquid Damage Handset BaseImportant Information Base ChargerPS-0034 PS-0035 120V AC, 60 HzCompliance Information FCC Part 15 information FCC Part 15.105bRF exposure information Terminal equipment Radio equipment574,727 581,598 606,598 650,790 660,269 663,981 671,248

Connect the power and telephone cords

LINE

TEL

here ￿rst.

here rst.