Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short beeping tone. If you set the Message Alert to On and when a new message is received, the alert tone will sound every 15 seconds.
1)Press MENU/CLOCK five times in standby mode.
You hear “Message alert” and the current setting ([ 
] Off or [ 
] On), and it is displayed on the base. Then you hear the instructions for setting the Message Alert.
2)Press volume/SELECT/ 
or volume/SELECT/ 
to make your selection.
3)Press SET to select the new setting. You hear a confirmation tone, then the announcement “Message alert” followed by the current setting you have selected. After a few seconds, the system announces “To set language, press menu again.” When the first new message is received, the alert tone will begin to sound.
Turning the Message Alert tone off by pressing any key.
1)To quickly turn Message Alert tone off, press any key on the base unit and the tone will automatically deactivate. To reset, go back into the menu setup mode (steps 1 - 3 above.)
Turning Message Alert tone off when you’re away from your phone.
1)When all new messages are played back using the remote playback feature (see page 54) the Message Alert tone will automatically deactivate. The tone will not deactivate until all messages are played back.
[ 46 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E | www.uniden.com |