2)Start recording your message. You have 30 seconds, and the message counter
starts to count down [ 
] to [ 
] every second.
3)When you are finished recording your greeting, press greeting, the 
key or SET. You will hear a confirmation tone, and then your greeting plays back for you.
▼Choosing between the two outgoing messages
Press greeting in standby mode. Then press greeting again when the outgoing message is played. This switches between the prerecorded greeting and the personal greeting. After the greeting finishes playing, you will hear a confirmation tone is heard.
To delete the personal Greeting, press the 
key during the announcement and the system announces “Greeting has been deleted.”
Setting the Base Ringer Volume
You will hear three ringer options. One allows you to turn the ringer off. The other two are volume levels.
When you have set the base ringer to off and the handset is on the base, you will still hear the ringer from the handset.
charge | in use |
memo
rec
volume SELECT
answer on/off MENU/CLOCK greeting
ringer | SET | find hs |
1)Press ringer.
You hear the ringer at the current volume level
([ 
] High, [ 
] Low, [ 
] off) (if you set the base ringer volume to off, “Ringer off” is announced) and it is displayed on the base.
2)Press ringer repeatedly until the desired ringer option appears.
3)The system displays the new ringer volume.
[ 48 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E | www.uniden.com |