Uniden DXAI 5188-2 Series manual General Information, AC Adapter Information, Battery Information

Page 63

General Information

The phone complies with FCC Parts 15 and 68. Operating temperature: -10°to 50°C (+14°F to +122°F)

AC Adapter Information

(For the base)

 

AC Adapter part number:

AD-314

Input Voltage:

120V AC 60Hz

Output Voltage:

9V DC 350 mA

Battery Information

 

Battery part number:

BT-800

Capacity:

800 mAh, 3.6V

Frequency

925.181-927.451 MHz

 

5739.320-5746.130 MHz

(For the charging cradle) AD-310

120V AC 60Hz

9V DC 210 mA

You can also use BT-905, but its usage time is less than BT-800. Purchase BT-800 at Uniden Website www.uniden.com.

To avoid damage to the phone use only Uniden AD-314, AD-310 and BT-800 (or BT-905 having less usage time) with your

phone.

If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of time the handset is off the base.

Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year.

A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting the Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. We can also be reached on the web at www.uniden.com.

Specifications, features, and availability of optional accessories are all subject to change without prior notice.

www.uniden.com

A D D I T I O N A L I N F O R M AT I O N [ 63 ]

A D D I T I O N A L I N F O R M AT I O N

Image 63
Contents Page Page Contents Welcome Features Handsets Controls and FunctionsExtra Charging Cradle for Second Handset Main Base UnitInstalling the Phone Choose the best locationDo the following steps Install the rechargeable battery packs into both handsets Cleaning the battery charging contacts Low battery alertConnect the main base unit and charging cradle For assistance Modular Standard wall plate mounting Mounting the Main Base Unit on a WallDirect wall mounting Register Handsets to the Main Base Before Using To receive a transfer call from the second handset When to Re-register HandsetsCall Transfer Feature To transfer a callSetting Menu Display Options Setting AutoTalk and CidcwEntering your Area Code Choosing the dialing mode Setting the language Making and Receiving Calls Temporarily Mute Ringer Adjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volume Earpiece volumeTraveling Out-of-Range Tone Dialing Switch OverUsing Call Waiting Selecting a Different ChannelFind Handsets Storing Phone Numbers and Names in Speed Dial Memory VolPress memory or select/channel Press memory or select/channel. Store Number is displayed If you make a mistake while entering a name Steps for Entering Names and Special CharactersMaking Calls from Speed Dial Memory Memory dialing from Standby ModeChain Dialing Speed dialing from Talk ModePress memory or select/channel again Editing a Stored Name and/or Phone NumberPress end to return to standby mode Press select/channel or delete/transfer Erasing a Stored Name and Phone NumberPress select/channel RocketDialStoring and Editing the RocketDial Making Calls with the RocketDialDeleting the RocketDial Caller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsPress call id/menu Viewing the Caller ID Message ListPress delete/transfer Deleting Information from the Caller ID ListDeleting a Caller ID message Deleting all Caller ID names/numbersDisplay returns to the summary screen Making a Call from the Caller ID List Press call id/menu, then press vol/ / or vol/ / to Storing Caller ID Messages in Memory DialingIntegrated Answering Device Turning the Answering System On/Off Setting Up Your Answering System Answering System SettingPresstalk/flash Setting the Time Setting a Personal Security Code PIN Setting the Ring Time Selecting the Message Record Time Announce only featureSetting the Message Alert tone Recording a personal outgoing message Greeting Setting Your Outgoing Message GreetingPreset message Selecting the LanguageChoosing between the two outgoing messages Setting the Base Ringer VolumeUsing Your Answering System Adjusting the Speaker Volume LevelTemporarily Mute the Base Ringer Repeating a message Playing your messagesSkipping a message Deleting a Message Recording a conversation Voice memoRemote access Turn on the answering system remotely To remove the beltclip Installing the BeltclipChanging the Digital Security Code To attach the beltclipHeadset Installation Battery replacement and handlingPower Failure Symptom Suggestion Charge/in use or TroubleshootingSymptom Suggestion Memory may be full. Delete some or all of the saved messages Symptom Suggestion Case Action Liquid DamageFrequency Battery InformationGeneral Information AC Adapter InformationPrecautions Installation Considerations Terminal Equipment Radio Equipment K, L IndexPage Remote Operation Card Task Key At Uniden, we´ll take care of you