Uniden DXAI 5188-2 Series Headset Installation, Battery replacement and handling, Power Failure

Page 57

Headset Installation

Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack.

Your phone is ready for hands-free conversations. (Headset may be purchased by calling the Uniden Parts Department or visiting the web site, see the QUICK REFERENCE GUIDE included in your package.)

Note on Power Sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts Department for a replacement battery.

Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden battery model and Uniden adapter model specifically designated for this product.

Power Failure

Caution

During the period that the power is off, you will not be able to make or receive calls with the telephone.

•Use only the specified Uniden battery packs.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery casing.

Maintenance

Caution

A D D I N F O

To maintain a good charge, it is important to clean the charging contacts on the handsets, main base unit and charging cradle once a month. Using water only, dampen a cloth to clean the charging contacts. Then, make sure to go back over the charging contacts with a dry cloth.

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

I T I O N A L R M AT I O N

www.uniden.com

A D D I T I O N A L I N F O R M AT I O N [ 57 ]

Image 57

Contents Page Page Contents Welcome Features Handsets Controls and FunctionsExtra Charging Cradle for Second Handset Main Base UnitInstalling the Phone Choose the best locationDo the following steps Install the rechargeable battery packs into both handsets Cleaning the battery charging contacts Low battery alertConnect the main base unit and charging cradle For assistance Modular Standard wall plate mounting Mounting the Main Base Unit on a WallDirect wall mounting Register Handsets to the Main Base Before Using Call Transfer Feature When to Re-register HandsetsTo transfer a call To receive a transfer call from the second handsetSetting Menu Display Options Setting AutoTalk and CidcwEntering your Area Code Choosing the dialing mode Setting the language Making and Receiving Calls Handset ringer tone and volume Adjusting the Handset Ringer and Earpiece VolumeEarpiece volume Temporarily Mute RingerTraveling Out-of-Range Tone Dialing Switch OverUsing Call Waiting Selecting a Different ChannelFind Handsets Storing Phone Numbers and Names in Speed Dial Memory VolPress memory or select/channel Press memory or select/channel. Store Number is displayed If you make a mistake while entering a name Steps for Entering Names and Special CharactersMaking Calls from Speed Dial Memory Memory dialing from Standby ModeChain Dialing Speed dialing from Talk ModePress memory or select/channel again Editing a Stored Name and/or Phone NumberPress end to return to standby mode Press select/channel or delete/transfer Erasing a Stored Name and Phone NumberStoring and Editing the RocketDial RocketDialMaking Calls with the RocketDial Press select/channelDeleting the RocketDial Caller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsPress call id/menu Viewing the Caller ID Message ListDeleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Press delete/transferDisplay returns to the summary screen Making a Call from the Caller ID List Press call id/menu, then press vol/ / or vol/ / to Storing Caller ID Messages in Memory DialingIntegrated Answering Device Turning the Answering System On/Off Setting Up Your Answering System Answering System SettingPresstalk/flash Setting the Time Setting a Personal Security Code PIN Setting the Ring Time Selecting the Message Record Time Announce only featureSetting the Message Alert tone Preset message Setting Your Outgoing Message GreetingSelecting the Language Recording a personal outgoing message GreetingChoosing between the two outgoing messages Setting the Base Ringer VolumeUsing Your Answering System Adjusting the Speaker Volume LevelTemporarily Mute the Base Ringer Repeating a message Playing your messagesSkipping a message Deleting a Message Recording a conversation Voice memoRemote access Turn on the answering system remotely Changing the Digital Security Code Installing the BeltclipTo attach the beltclip To remove the beltclipHeadset Installation Battery replacement and handlingPower Failure Symptom Suggestion Charge/in use or TroubleshootingSymptom Suggestion Memory may be full. Delete some or all of the saved messages Symptom Suggestion Case Action Liquid DamageGeneral Information Battery InformationAC Adapter Information FrequencyPrecautions Installation Considerations Terminal Equipment Radio Equipment K, L IndexPage Remote Operation Card Task Key At Uniden, we´ll take care of you