Uniden DXAI 5188-2 Series manual Remote access

For your convenience remote operation cards are provided for you to use while away from home (located backward of this manual).

You must enter a command within 15 seconds of entering command waiting mode or the answering system automatically hangs up and returns to standby.

Remote access

You can operate your answering system from a remote location using any touch-tone telephone. Use this function to check for recorded messages, to play or delete messages, even to record a new greeting message.

1)Call your telephone number.

2)During the greeting message, press 0 and enter your PIN code. (See "Setting a Personal Security Code (PIN)," page 43).

3)The answering system announces the current time and the number of messages stored in memory. Then you hear "To play incoming messages, press zero two. For help, press one zero."

4)You may continue to listen to the voice prompts, or you may select a command from the following chart:

Command		Function
0	then 1	Repeat a Message
0	then 2	Playing Incoming Messages
0	then 3	Skipping a Message
0	then 4	Deleting a Message
0	then 5	Stop Operation
0	then 6	Answering System On
0	then 7	Memo Record/Stop*
0	then 8	Greeting Message Record/Stop*
0	then 9	Answer System Off
1	then 0	Help

[ 54 ] T H E I N T E G R AT E D A N S W E R I N G D E V I C E www.uniden.com