Uniden EXS 9950 manual Mounting the base unit on a wall, Standard wall plate mounting

Page 11

Mounting the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

1

2 - 7

4

Wall plate

7

3

7

5

AC outlet

1	Snap the wall mount
	adapter into the
	notches on the base.
2	Plug the telephone
	line cord to the
	TEL LINE jack and the
	AC adapter to the
	DC IN 10V jack.
3	Plug the telephone
	line cord into the
	telephone outlet.
4	Wrap the AC adapter
6	cord inside the
2	molded wiring
2	channel. Then wrap
	the cord around the
	strain relief notch.
5	Plug the AC adapter
	into a standard
	120V AC wall outlet.
6	Raise the antenna to a
	vertical position.
7	Align the mounting
	slots on the base. with
	the mounting posts on
AC adapter	the wall. Push in and
	down until the phone

is firmly seated.

8

Image 11

Contents Page Introduction Features29 30 31 32 Controls and functions42 43 44 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Installing the handset battery pack Cleaning the battery contacts Charging optional battery packsBattery use time per charge When the battery charge becomes lowAutomatic digital code security Other Operations Making a callHandset on the base Receiving a callFrom the handset From the baseFlash and Call Waiting Adjusting the ringer and earpiece volumeMute Redialing a callStoring phone numbers One-touch memory dialing Making calls with memory dialing Memory dialingErasing a stored phone number Using page feature Way conferencing When speaking on the handsetWhen speaking on the base Integrated answering device IntegratedTo turn the answering system off, press Setting the clock» Choosing between the two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message GreetingSelecting a PIN code » Announce only featureSelecting the message record time Ring time/toll saver switch Allows you to set the number Setting ring time switchPlaying your messages Using your answering systemSkipping a message Repeating a message» Deleting all messages Deleting a messageVoice memo » Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor To remove the beltclip Installing the beltclipHeadset installation To attach the beltclipBattery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion Handset SpecificationsGeneral Base unitW, X, Y, Z IndexK, L