Uniden EXS 9950 manual Setting the clock, To turn the answering system off, press

Page 26

If you have not recorded your personal outgoing message when you turn the answering system on, the preset message is automatically set. To set your personal message, see page 24.

Setting up your answering system Turning the answering system on/off

1 To turn the answering system on, press answer on/off . A tone will sound and

the current greeting message is played.

backupopen	2 To turn the answering system off, press
battery

	answer on/off again.

Setting the clock

The clock on EXS 9950 Answer System starts when power is applied to the base. Follow these steps to set the clock to the correct time.

Press skip or

repeat multiple times to scroll through days, hours, minutes, etc.

backupopen battery

1 Press and hold clock until a tone sounds.

2 First, press skip or repeat until the correct day of the week is announced. (Number through displays on the base as each day is announced.) Press clock again to select the day.

skip/

If you don't set the clock within two minutes, the system returns to standby.

3	Next, press		skip	or	repeat			until you hear the correct
	hour setting. Numbers through							display on the base as each
	hour is announced. Press				clock		again to select the correct time.
4	Press	skip	or	repeat			until you hear the correct time
	setting. Numbers			through		display on the base as each
	minute is announced. Press					clock		again to select the correct
	time.
5	The LED displays an			or	. Press			skip	or repeat
	until you hear the correct AM/PM setting.
6	Press	clock	again to end the time/day setting.
	The EXS 9950 announces the time that you have set.

23

Image 26

Contents Page Features IntroductionControls and functions 29 30 31 3242 43 44 Contents Handset Read this firstBase unit Checking the package contents Setting up the base Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitPulse Choose the dialing modeIf your dialing system is Set the switch to Tone If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack When the battery charge becomes low Charging optional battery packsBattery use time per charge Cleaning the battery contactsAutomatic digital code security Making a call Other OperationsFrom the base Receiving a callFrom the handset Handset on the baseAdjusting the ringer and earpiece volume Flash and Call WaitingRedialing a call MuteStoring phone numbers Making calls with memory dialing Memory dialing One-touch memory dialingErasing a stored phone number Using page feature Way conferencing When speaking on the handsetWhen speaking on the base Integrated Integrated answering deviceSetting the clock To turn the answering system off, press» Recording your personal outgoing message Greeting Setting your greeting» Preset Message » Choosing between the two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Ring time/toll saver switch Allows you to set the numberUsing your answering system Playing your messagesRepeating a message Skipping a message» Deleting individual message Deleting a messageVoice memo » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor To attach the beltclip Installing the beltclipHeadset installation To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion Base unit SpecificationsGeneral HandsetW, X, Y, Z IndexK, L