Uniden EXS 9950 manual Remote room monitor

Page 35

You can not use # and * while the new message are playing. Press # then 5 to stop Message playback first and go to step 4.

Remote room monitor

You can call your answering system from any touch-tone phone and monitor sounds in the room where your base is installed.

1 Call your telephone number.

2 While the answering machine is activated, press # and your PIN code.

3 The answering system begins announcing the time and day.

4 Press # then 5 to stop the messages.

5 Press # then * . You hear sounds in the room where your phone is installed. After 15 seconds, the answering system returns to the command waiting mode.

6 Press # then * to monitor the room for another 15 seconds. Or select another remote function. Or hang up to exit the system. The answering system automatically returns to standby.

32

Image 35

Contents Page Introduction Features29 30 31 32 Controls and functions42 43 44 Contents Handset Read this firstBase unit Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Tone PulseStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Installing the handset battery pack Cleaning the battery contacts Charging optional battery packsBattery use time per charge When the battery charge becomes lowAutomatic digital code security Other Operations Making a callHandset on the base Receiving a callFrom the handset From the baseFlash and Call Waiting Adjusting the ringer and earpiece volumeMute Redialing a callStoring phone numbers One-touch memory dialing Making calls with memory dialing Memory dialingErasing a stored phone number Using page feature Way conferencing When speaking on the handsetWhen speaking on the base Integrated answering device IntegratedTo turn the answering system off, press Setting the clock» Choosing between the two outgoing messages Setting your greeting» Preset Message » Recording your personal outgoing message GreetingSelecting a PIN code » Announce only featureSelecting the message record time Ring time/toll saver switch Allows you to set the number Setting ring time switchPlaying your messages Using your answering systemSkipping a message Repeating a message» Deleting all messages Deleting a messageVoice memo » Deleting individual messageRecording a conversation Command Function Remote access away from homeRemote room monitor To remove the beltclip Installing the beltclipHeadset installation To attach the beltclipBattery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion Handset SpecificationsGeneral Base unitW, X, Y, Z IndexK, L