Uniden EXS 9950 manual Installing the handset battery pack

Page 13

Installing the handset battery pack

Charge the battery pack for more than 17 hours before you start using your phone.

1 Press in on the battery cover release and slide the cover down until it comes off.

2 Install the nickel-cadmium battery with the label facing down.

Label face	3 Slide the battery cover on
	3 Slide the battery cover on
	until it snaps into place.

4 Place the handset on the base.

5 Make sure that the “status” LED lights. If the LED

doesn’t light, check to see

that the AC adapter is

plugged in and that the

status LEDhandset makes good contact with the base charging contacts.

Use only Uniden Battery (BT-999) supplied with your phone.

10

Image 13

Contents Page Introduction Features29 30 31 32 Controls and functions42 43 44 Contents Base unit Read this firstHandset Checking the package contents Choose the best location Setting up the baseConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modePulse If you arent sure of your dialing systemStandard wall plate mounting Mounting the base unit on a wallDirect wall plate mounting Installing the handset battery pack Battery use time per charge Charging optional battery packsWhen the battery charge becomes low Cleaning the battery contactsAutomatic digital code security Other Operations Making a callFrom the handset Receiving a callFrom the base Handset on the baseFlash and Call Waiting Adjusting the ringer and earpiece volumeMute Redialing a callStoring phone numbers One-touch memory dialing Making calls with memory dialing Memory dialingErasing a stored phone number Using page feature When speaking on the base When speaking on the handsetWay conferencing Integrated answering device IntegratedTo turn the answering system off, press Setting the clock» Preset Message Setting your greeting» Recording your personal outgoing message Greeting » Choosing between the two outgoing messagesSelecting the message record time » Announce only featureSelecting a PIN code Ring time/toll saver switch Allows you to set the number Setting ring time switchPlaying your messages Using your answering systemSkipping a message Repeating a messageVoice memo Deleting a message» Deleting individual message » Deleting all messagesRecording a conversation Command Function Remote access away from homeRemote room monitor Headset installation Installing the beltclipTo attach the beltclip To remove the beltclipBattery replacement and handling MaintenanceSymptom Suggestion TroubleshootingSymptom Suggestion General SpecificationsBase unit HandsetK, L IndexW, X, Y, Z