Uniden EXS 9950 manual Storing phone numbers

Page 20

You must press a key within 30 seconds or the phone will return to standby. If you return the handset in the cradle, the phone will return to standby too.

DIALING MEMORY 17

Storing phone numbers

Your EXS 9950 stores up to 24 numbers in handset (20 memory dials and 4 one-touch memory dials).

1 Press mem while in standby mode. The talk/batt LED flashes.

2 Dial the number you wish to store (up to 16 digits).

3 Press mem again.

4 Enter a two-digit number (01 - 20) or press One-touch memory key

( m1 - m4 ) to select the memory location where you wish to store the number.

5 The talk/batt LED goes out and the confirmation beep indicates the number has been stored.

Use the supplied memo sticker to write stored number.

Image 20

Contents Page Features IntroductionControls and functions 29 30 31 3242 43 44 Contents Handset Read this firstBase unit Checking the package contents Setting up the base Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsAutomatic digital code security Making a call Other OperationsReceiving a call From the handsetFrom the base Handset on the baseAdjusting the ringer and earpiece volume Flash and Call WaitingRedialing a call MuteStoring phone numbers Making calls with memory dialing Memory dialing One-touch memory dialingErasing a stored phone number Using page feature Way conferencing When speaking on the handsetWhen speaking on the base Integrated Integrated answering deviceSetting the clock To turn the answering system off, pressSetting your greeting » Preset Message» Recording your personal outgoing message Greeting » Choosing between the two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Ring time/toll saver switch Allows you to set the numberUsing your answering system Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memo» Deleting individual message » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Installing the beltclip Headset installationTo attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion Specifications GeneralBase unit HandsetW, X, Y, Z IndexK, L