Uniden EXS 9950 manual Deleting a message, Voice memo, » Deleting individual message

Page 32

Deleting a message

»Deleting individual message

When you press delete , you are permanently deleting the message. Once deleted, the message cannot be replayed.

backupopen battery

1 Press play/stop to review your message.

2 If you decide to delete a message, press delete anytime during the message. The system beeps and immediately goes to the next message.

The voice memo function is completely independent of the outgoing message.

It’s handy for leaving others a quick message.

3 After you have played all of your messages, a long tone sounds on the base speaker.

»Deleting all messages

Press and hold delete after reviewing your messages. A tone sounds when all messages are cleared.

A voice memo message will be stored as a typical recorded message.

Stand within 12 inches in front of the microphone and speak clearly.

Voice memo

The voice memo function allows the user to record a message (up to 10 minutes) on the base.

	1	Press and hold	voice memo	,
		until you hear a long beep. The
		message counter LED blinks.
open	2	Speak into the microphone.
backup battery	2
	3	When you have finished, press
		voice memo	or play/stop	to
		stop recording. The system returns
	Microphone	to standby.
	Microphone
	4	To play voice memo, press
		play/stop .

29

Image 32

Contents Page Features IntroductionControls and functions 29 30 31 3242 43 44 Contents Handset Read this firstBase unit Checking the package contents Setting up the base Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to TonePulse If you arent sure of your dialing systemMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the handset battery pack Charging optional battery packs Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contactsAutomatic digital code security Making a call Other OperationsReceiving a call From the handsetFrom the base Handset on the baseAdjusting the ringer and earpiece volume Flash and Call WaitingRedialing a call MuteStoring phone numbers Making calls with memory dialing Memory dialing One-touch memory dialingErasing a stored phone number Using page feature Way conferencing When speaking on the handsetWhen speaking on the base Integrated Integrated answering deviceSetting the clock To turn the answering system off, pressSetting your greeting » Preset Message» Recording your personal outgoing message Greeting » Choosing between the two outgoing messagesSelecting a PIN code » Announce only featureSelecting the message record time Setting ring time switch Ring time/toll saver switch Allows you to set the numberUsing your answering system Playing your messagesRepeating a message Skipping a messageDeleting a message Voice memo» Deleting individual message » Deleting all messagesRecording a conversation Remote access away from home Command FunctionRemote room monitor Installing the beltclip Headset installationTo attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSymptom Suggestion Specifications GeneralBase unit HandsetW, X, Y, Z IndexK, L