Uniden WDECT3355, WDECT3355 owner manual Setting up the Menu

To go back to the previous screen,

press / del.

[ 13 ]

Setting up the Menu

Entering the Menu

1)	Press the	/del key in standby mode.
			DirectLink Mode
2)	Use /vol/	or /vol/ to move the pointer to a
			Room Monitor
	desired main menu (DirectLink Mode, Room Monitor,
	Handset Setup, Answ. Setup, Global Setup, and		Handset Setup
	System Reset).

3)Press to select the desired main menu.

4)Use /vol/ or /vol/ to select a desired submenu, and then press to enter.

In the submenu, use /vol/ or /vol/ to select an item. Press to confirm your selection. For detailed instructions, see the following sections for the desired submenu.

5)To exit the menu, press or return the handset to the cradle.

DirectLink Mode

Entering the Two Way Communication between the Handsets Anywhere without the Base

1) Enter the DirectLink Mode menu (see “Entering the Menu”		To enter
above). To enter DirectLink mode press
		DirectLink mode
[SELECT] appears.
		press [SELECT]
2) Press	to enter the DirectLink mode. You will
hear a confirmation tone, and DirectLink Mode Complete
appears.
To adjust ringer volume, press /vol/ or /vol/ to select one of three ringer
volume (off, low, or high).

3)To return back to the normal mode, exit the DirectLink mode. Press /del, and

then , or return the handset to the cradle. DirectLink Mode Cancel appears.