Redialing from the Base
1)Press 
on the base.
2)Press redial/pause on the base. The last number dialed from the base is redialed.
Adjusting the handset ringer, Earpiece and Speaker Volume
Handset ringer volume
Press the volume up key or volume down key (labeled as 
/vol/
or 
/vol/
) in standby mode to select one of three ringer volume (off, low, or high).
Earpiece and speaker volume
Pressing the volume up key or volume down key (labeled as 
/vol/
or 
/vol/
) during a call will change the earpiece or speaker volume of the handset. This setting will remain in effect after the telephone call has ended.
When you press volume up key ( 
/vol/
) in the maximum volume level or volume down key ( 
/vol/
) in the lowest volume level, an error tone sounds.
Ringer Mute
You can temporarily mute the incoming ring. When the handset is off the cradle
and the phone is ringing, press 
. The incoming ring will return to the previous setting starting with the next incoming call.
Standby Mode
-The handset is not in use and 
has not been pressed.
[ 24 ]