Setting the call screen
You can screen calls when the Call Screen function is set to On.
1)Press clock/MENU six times.
The current Call Screen setting (On or Off) appears on the base.
2)Press 
skip/SELECT or 
repeat/SELECT to choose On or OF.
3)Press SET. A confirmation tone sounds, and the system announces the new setting.
Screening a call
From the base
To screen an incoming call, do the following steps as follows:
1) After the answering system answers, the base speaker will let you hear the calls as the machine records the message. To adjust the volume, press 
/ vol/
or 
/vol/
.
To mute the call screen temporarily, press | play/stop when the system | is |
answering. |
|
|
2)To answer the call, press 
or pick up the handset from the base (when AutoTalk is
set to On). If the handset is away from the base, press 
, 
speaker or any
number key, 
tone
, or 
(when Any Key Answer is set to On). The answering system will disconnect automatically.
From the handset
1)Press 
when the system is answering.
To mute the call screen temporarily, press 
when the system is answering.
2)To answer the call, press 
, otherwise press 
to cancel the call screen and the handset return to standby mode.
•If you set the call screen to off, you can not screen a call.
•If you press
, call screen will be canceled and the handset is put in talk mode.
• If you press
while another handset is screening a call, you will hear a beep and you can not screen
a call.
[ 48 ]