Uniden WDECT3355, WDECT3355 Adjusting the speaker volume level, Answering System Settings

Page 47

1)When the phone is in standby mode, press /volume/ or /volume/ repeatedly to scroll through ringer volumes. The ringer level is displayed, and you will hear each volume level. The last ringer heard will be the volume setting, then the phone returns to standby mode.

2)You can also set the base ringer volume while the phone is ringing by pressing the /volume/ or / volume/ .

Adjusting the speaker volume level

When the base speaker is in use, press /volume/ or /volume/ on the base to adjust the volume. Press / volume/ for louder or /volume/ for softer.

The number 1-10 appears on the base indicating the volume levels. 1 being the softest and 10 being the loudest.

Answering System Settings

To set the following six functions you must enter the menu mode.

•To scroll through the menu options, repeatedly

press clock/MENU on the base in standby mode. The system returns to standby after the last menu option. A confirmation tone sounds to indicate standby mode.

•When you have completed the setting, press

play/stop to exit the menu mode, or clock/ MENU to move to the next menu option.

•You can also set these menus from the handset. See “Answering System Setup” on page 16

for instructions.

clock/MENU

"Time"

clock/MENU

"Security Code"

clock/MENU

"Ring Time"

clock/MENU

"Record Time"

clock/MENU

"Message Alert"

clock/MENU

"Call Screening"

clock/MENU

Return to Standby

For your convenience, voice prompts will guide you through the menu setup mode.

[ 44 ]

Image 47

Contents WDECT3355 Other cordless telephones Installation & safetyContents Controls and Functions Getting StartedFor +1, +2 models only Main BaseWelcome FeaturesTerminology Attaching wall mount adapter and Routing the telephone cord Mounting the base unit on a wallCleaning the battery charging contacts Battery maintenanceBattery use time per charge Low battery alertBattery replacement and handling Installing the Beltclip0 a N d s e t Headset InstallationDisplay and Icons Room Monitor About the Menu optionsSummary of the Main Menu and Submenu Submenu name Description Handset SetupAnswering Setup System Reset Global SetupSetting up the Menu To Room Monitor Handset #2 Base RoomMonitor Handset #2 Using Room MonitorRoom Monitor Selecting a Ringer Tone Handset SetupDistinctive Ringer Setup Setting the AutoTalkSetting the Key Touch Tone Answering System SetupSetting the Anykey Answer Setting the True BannerSetting the Call Screen Setting the Ring TimeSetting the Record Time Setting the Message Alert On or OffSetting Day and Time Global SetupSetting Name Tag POP ID Setting Insert Zero New Zealand onlyCopy Phonebook Setting the Dial Mode Australia onlyDe-register the Handset System ResetReplacing the Base Setting To set Autotalk, see page 15 or to set Anykey Answer see Making and Receiving CallsTo unlock the keypad Keypad lockPlacing a Call on Hold To lock the keypadDeleting a Redial Record Redialing from Standby ModeRedialing from Talk Mode Redialing a CallRedialing from the Base Adjusting the handset ringer, Earpiece and Speaker VolumeHandset ringer volume Earpiece and speaker volumeWith the base Do Not Disturb DNDMute Microphone With the handsetClarity Booster Tone dialing switch-over australia onlyTraveling Out-of-Range Way Conferencing Privacy modeWhen speaking on the handset New Message LED When speaking on the baseFind Handset Flash and Call WaitingPhonebook Movies Beethoven9/SPD1 Distinctive Ring No Selectn FlickerSpeed Dial No Selectn SPD1Empty Steps for Entering Names and Special Characters If you make a mistake while entering a name Phonebook Search A-Z Store Select Viewing the PhonebookSpeed Dialing Making Calls Using the PhonebookFrom Standby Mode From Talk ModeDelete Memory? Yes Editing the Stored DataPhonebook Search A-Z Store Select Store/Edit Name Movies Deleting the Stored DataMemory Dialing base only Chain DialingJane Smith Caller ID21/12 1120AM To finish the viewing operation, press or during a call Viewing the Caller ID ListDelete Caller ID Yes Deleting a Caller ID messageDeleting Information from the Caller ID List Deleting all Caller ID names/numbersStoring Caller ID messages in the Phonebook Using the Caller ID Message ListCalling a party from the Caller ID list Adding Zero to Caller ID message New Zealand onlyIntegrated Answering Device FeaturesTurning the Answering System On/Off Answering System Default SettingsFunctions Default Setting Reference Base Handset Setting up your Answering System Answering System Settings Adjusting the speaker volume levelPress clock/MENU Selecting the message record time Setting the ring timeTurning the message alert tone off by pressing any key Announce only featureSetting the message alert From the handset Setting the call screenScreening a call From the baseRepeating a message Using your Answering SystemPlaying your messages Deleting a message Skipping a messageFrom the base Voice memoRecording a conversation From the handsetRemote Operation Remote access away from homeRemote access with the handset Remote Key Function Multi-Handset Expendability Expanding Your PhonePlace handset on main base to register Register the HandsetDirectLink Call SUN 1200A Handset #1 DirectLink Mode To DirectLink PressRoom monitor To intercom Intercom/Call Transfer FeatureIntercom From the base to a handset Call Transfer FeatureReplacing the Base From handset to handset or to the baseChanging the Digital Security Code Additional InformationBattery replacement and handling Symptom Suggestion TroubleshootingSymptom Suggestion Symptom Suggestion G, H IndexCall your phone number from a touch-tone phone Remote operation cardTask Warranty Uniden Australia Pty Limited/Uniden New Zealand Limited