For model number verification, visit our website www. uniden.com.au or www.uniden.co.nz
[ 59 ]
Call Transfer Feature
From handset to handset or to the base
1)During a call, press 
/transfer/int’com on the handset.
2)Select a handset or the base to transfer the call within 10
seconds. (Refer to step 2 in the intercom section on page 58). The call will automatically be placed on hold, and an intercom tone sounds.
To cancel the transfer, press 
or 
on the initiating handset.
3)On the receiving handset, to answer the page, press 
or
/transfer/int’com (or 
or intercom on the base). Or press any number key,
tone
, or 
(when Any Key Answer is on), or pick up the handset from the cradle (When Auto Talk is on).
4)To speak to the caller, press 
on the receiving handset (or 
on the base).
From the base to a handset
1)During a call, press intercom on the base. The call will automatically be placed on hold.
2)Select the handset you want to talk with by pressing the number key
handsets press 
tone . An intercom tone sounds. To cancel the transfer, press inter-
com or 
on the base.
3)On the receiving handset, press 
or 
/transfer/int’com to answer the
page. Or press any number key, 
tone
, or 
(when Any Key Answer is On), or pick up the handset from the cradle (when AutoTalk is On). The intercom mode is activated, but the caller is still on hold.
4)To speak to the caller, press 
on the receiving handset.
Replacing the Base
If the base unit is replaced with a different base from this same series of cordless models, you must clear the handset(s) and base identification numbers. To do this, select “System Reset” from handsets display menu option list (see page 20 for guidance).