When speaking on the base
1) | Press |
| or | speaker on the handset to initiate |
| ||||
| ||||
| the |
| ||
2) | To hang up, return the handset to the cradle, or press | |||
| key on the handset. The base will still be connected to the | |||
| call. |
|
|
|
Find Handset
To locate the handset, press mute/find handset on the base when the base is in standby mode. All registered handsets beeps for 60 seconds, and Paging appears on the handset display. To cancel paging, press any key on the handset or mute/find handset on the base.
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone sounds during a call:
AUSTRALIA:
Press on the handset or flash on the base, then press 2 to switch between callers.
NEW ZEALAND:
Press on the handset or flash on the base to switch between callers.
New Message LED
The new message LED on the handset flashes when you have new messages in your answering system. The LED stops flashing when all new messages are played back (see “Using your Answering System” on page 49).
[ 28 ]