4-Way Conferencing
Fourth person, at either the handset or the base, may be added to the conference call. For example, to add a fourth party to an ongoing conference call at the base or another
handset, press 
on the fourth party’s handset (or 
on the base). To remove
either caller from your conversation, press 
on the party’s handset (or 
on the base). The other parties will still be connected to the call.
Intercom/Call Transfer Feature
Intercom and Call Transfer features are available for your phone.
Intercom
From handset to handset or to the base
1)Press 
/transfer/int’com in standby mode.
2)Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the |
| To intercom |
| ||
handset (or the base), press /vol/ | or |
|
| ||
| Handset | #2 | |||
/vol/ , and then press |
| . If you select | All, | ||
| Handset | #3 | |||
all handsets and the base will be paged. An intercom |
| ||||
|
|
| |||
tone sounds. |
|
|
|
| |
3)On the receiving handset (or the base), to answer the call, press 
or 
/transfer/int’com (or intercom or 
on the base). Or press any number key,
tone
, or 
(when Any Key Answer is on), or pick up the handset from the cradle (when AutoTalk is on).
4)To hang up the intercom call, press 
on either handset (or intercom on the base).
From the base to a handset
1)Press intercom on the base in standby mode.
2)Select the handset you want to talk with by pressing number key
To page all the handsets press 
tone .
3)Follow the steps
•If the party is busy or out of range, the handset returns to standby mode.
•If any of the following occurs while selecting the other handset (or the base), the operation will be canceled.
-Press 
or 
.
-Receive an outside/ intercom call or page.
•When the party does not answer within one minute, the operation is canceled.
•Standby Mode - The handset is not in use and
has not been pressed.
[ 58 ]