Specifications
12W Stereo Amplifi er with DSP
Freq. Response | 3.3” |
|
[83mm] |
| |
| ||
|
| |
Weight |
|
|
1.9 lbs [1kg] |
|
|
Made for |
|
|
• iPod touch® (1st, 2nd, 3rd, and 4th generation) | • iPhone 4 | |
• iPod nano® (1st, 2nd, 3rd, 4th, 5th, and 6th generation) | • iPhone 3GS | |
• iPod classic® (4th, 5th, and 6th generation) | • iPhone 3G | |
• iPod mini |
| • iPhone |
up to: ~8.5” [~216mm]
4.6”
[118mm]
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all the instructions listed in this manual. Follow all safety and procedural recommendations to prevent damage to your self, your KICKER product, or your portable media device.
The iK100 should not be used near water or in an environment where exposure to liquids is possible. This includes but is not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid containers should not be placed on or near the iK100. The iK100 should not be cleaned with liquid cleaners. Use only a dry cloth to clean the iK100.
Only use the iK100 in areas with adequate open ventilation allowing at least 4” of space on all sides of the iK100. Do not set the iK100 on any surface or cover the iK100 with any object that could impede the airfl ow to and from the iK100. The iK100 should not be placed near any source of heat. This includes but is not limited to stoves, radiators, heating elements, electronic heat sources, and areas where excessive solar heat can be generated. Do not place the iK100 near any fl ame or place any fl ammable objects near the device.
The power outlet used to provide power to the iK100 should be accessible at all times. The power cord should be situated in a way that protects it from being pinched, walked on, tripped over, or accidentally pulled from the electrical outlet or the electrical input on the iK100. Do not run the cable through doorways or underneath objects that could damage the wire or tear the insulating material surrounding the wire. Only use the manufacturer supplied power supply with the iK100. We recommend using a surge protector/power conditioner and unplugging the iK100 during any electrical storms or situations that could cause voltage fl uctuations in the electrical system.
6 | ENGLISH |
2011 iK100 Multilingual Rev G.indd 6
9/20/2010 10:09:22 AM