MP3/WMA CD Programmed Playback (On Remote Control Only)
When programming the tracks on an MP3/WMA CD you must also select the directory number of the tracks being programmed.
You can program up to 64 tracks on an MP3/WMA CD, same as for a normal CD.
Programming can only be done while the player is in the Stop mode. If the MP3/WMA disc is playing, first press the 
STOP/BAND button to stop playback, then follow the programming steps below.
In this example the MP3/WMA CD contains a total of 09 Directories (Albums) and 193 Tracks (Files).
Let’s assume that the first track we want to program is Track #03 in Album #05.
1. Press the PROG/CLK button on the remote control.
The display shows Album “01.”
Track “001”, Program Number “P
2. Press the PRESET/ALBUM/MENU + button repeatedly to select Album #05.
(The display shows Track #102, it means the first track of Album #05 is #102.)
.
3. Press the SKIP/TUNING 
button repeatedly to select track # 05 of Album #05 (#107).
4. Press the PROG/CLK button again to enter Track 107 in program memory P- 01.
The program memory number advances to “P- 02”
5. Repeat Steps 2 through 4 to enter up to 64 tracks in the program memory.
After you have entered up to 64 tracks in the Program Memory, press the 
PLAY/PAUSE button to begin programmed playback.
26
MEMORY CARD OPERATION
Playing MP3/WMA Audio Files Stored On SD/MMC Memory Cards
NOTE: The memory card slot on this system enables playback of songs only in MP3 and WMA formats (without DRM). It cannot play songs purchased from iTunes or other songs in AAC format, songs in ATRAC format or songs purchased from some online music retailers. It may be possible to convert your music to one of the playable compressed formats, or burn it to an audio CD, depending on the DRM restrictions.
Press the FUNCTION/
button repeatedly until the main display shows “CARD.”
Insert the SD or MMC flash memory card containing MP3/ WMA audio files into the card slot by gently pressing into position until it locks in place. Cards can only be inserted one way.
The player will read the information on the card and the display will show the total number of files tracks and directories albums on the card. For example “08” albums, “49” tracks.
Press the 
PLAY/PAUSE button to begin playback.
Press SKIP TUNING 
or 
buttons to skip tracks.
Press PRESET/ALBUM/MENU + or – buttons to skip albums.
Press SELECT ID3/BIT RATE button to display title, album and artist information.
Playback will continue until the last track has played and then the display will again show the total number of tracks and albums on the card.
Press 
STOP/BAND button to stop playback at any time
27