Archos AV420 user manual Sound Parameters, Play Mode Settings

The Sound Parameters

Parameter	Description
Built-in Speaker	Turns on and off the built-in speaker. Same as long press on
	the center function button.
Volume	00 - 99
Bass	10 levels. Decreases or Increases the low frequencies.
Treble	10 levels. Decreases or Increases the high frequencies.
Balance	10 levels. Favors the right or left channel of the Stereo signal
Bass Boost	10 levels. Increases the very low frequencies
Reset button	Readjusts all settings to their default values

18.2Play Mode Settings

If you would like the AV400 to play through an entire folder of songs, play songs at random (shuffle), or any of the other playing options, you can set these parameters in the PlayMode settings. Click on the LEFT function button Setup while listening to music or via the main menu item Setup and then choose Playmode.

Parameter	Description
Folder	Play all tracks in the current directory or current album
All	Play all tracks on the AV400
Single	Play a single track then stop
Queue	While the current song is playing, click on Navigate, find the
	next song you want to play, then click Play. This is your queued
	song. You can only queue one song at a time. See the Playlist
	section to prepare multiple songs to play. Once the current
	track is finished playing, your queued track will be played. If
	you do not queue another track at this time, the AV400 will play
	the next song in the directory.
Scan	Each track in the directory is played for 15 seconds. This allows
	a quick sample of each song. If you want to play the whole
	song, click on the Play button during those first 15 seconds.
	The AV400 will then revert to single directory mode and play
	the rest of the songs in the directory without scanning.

61