![](/images/new-backgrounds/1309606/30960625x1.webp)
RADIO OPERATION
FM Antenna
Connect the detachable FM Antenna Wire to the FM Antenna Terminal as instructed in the section "INSTALLATION". Fully extend the FM Antenna Wire for maximum reception.
Radio Tuning
1.Press the POWER button to turn the unit on.
2.Press the FUNCTION button repeatedly until "FM" mode is reached.
3.In FM radio mod, if necessary, press the MODE button to select STEREO (ST) or MONO FM reception.
4.To manually tune the radio station, repeatedly press the TUN Up/Down buttons.
5.To automatically search the next or previous station with the strongest signal, press and hold the TUN Up/Down buttons until the frequency readout on the display begins to scan and then release the button. The tuner will stop scanning when a strong signal is reached.
NOTE: Use manual tuning to select weaker stations that might be bypassed during automatic tuning. If the automatic search does not stop at the exact frequency, for example, it stops at 100.9MHz instead of 100.8MHz, press TUN +/- to finely tune the exact frequency.
Preset Stations
The unit allows you to store up to 10FM stations in the preset memory positions for easy recalling any time.
1.Press the POWER button to turn on the unit.
2.To activate the radio, press the FUNCTION button to select FM band.
3.Tune to your desired station by pressing the TUN +/- buttons.
4.Press the MEM button. The preset channel number "01" and the icon "MEM" will flash on the display.
5.Select your desired preset number by pressing the CH +/- buttons.
6.After the preset channel number is selected, press the MEM button to confirm your selection. The station is saved in the preset channel now.
7.To store additional stations, repeat steps
Radio Broadcast System Selection
When the unit is used in another country with a slightly different radio broadcast system, the unit allows you to select USA, EU and Japan systems.
1.Set the unit to Power Off mode.
2.Press the MODE button repeatedly until the flashing "USA", "EU", or "JP" is seen.
3.Press the TUN +/- button to select one of the broadcasting systems.
4.Press the MEM button to save the setting and exit the setting mode.
NOTE: The following are the specifications of the three radio broadcast systems:
USA's Radio Broadcast System | Japan's Radio Broadcast System | |
FM 87.5 MHz - 108 | MHz, 0.1 MHz tuning step | FM 76.0 MHz - 108 MHz, 0.1 MHz tuning step |
EU's Radio Broadcast System |
| |
FM 87.5 MHz - 108 | MHz, 0.05 MHz tuning step |
|
Tips for the best reception
•To obtain the best FM reception, fully extend the FM antenna and adjust the direction.
9