AUXILIARY INPUT
The auxiliary input cable and plug are built in the unit and allows users to connect their CD player, MP3 player or other
1.Keep turning the Cord Retracting Wheel, located at the rear of the unit, to the right and pull out the AUX IN Cable located next to the wheel.
2.Connect the AUX IN Stereo Plug to the Line Out Jack or Headphone Jack of your external audio device.
3.Switch on the audio device.
4.Press the FUNCTION button repeatedly until AUX mode is displayed. The display will show the icon "AUX".
5.Control the volume level by the volume control on the audio device or pressing the VOL +/- on the main unit or the remote control.
NOTE:
If you're connected using the Line Out Jack of your external device, then you can only adjust the volume using the CE710CR control. If you're connected using the Headphone Jack of your external device, then you may need to adjust both the volume controls (CE710CR and external device) to get the best volume level.
Press the ON/OFF button to turn off the unit when you finish listening. Don't forget to switch off the power of your external device as well.
CLOCK AND CALENDAR SETTINGS
The clock and calendar can be set in Power Off mode.
Clock Setting
1.Press the MODE button 3 times, the clock starts to flash.
2.Press the TUN +/- button to set the hour.
3.Press the VOL +/- button to set the minute.
4.Press the MEM button to confirm the settings.
12/24 Hour Time Display Mode Setting
1.Press the MODE button repeatedly until the 12/24 Hour Format Setting mode is reached. The flashing '12hr' or '24hr' will be displayed.
2.Press TUN +/- button to select 12 hour or 24 hour time display mode.
3.Press the MEM button to confirm the setting.
Calendar Setting
Year
1.Press the MODE button repeatedly until the year setting mode is reached. The year readout flashes now.
2.To set the year, press the TUN +/- button to set the correct year.
3.Press the MEM button to confirm the setting.
Month/Date
1.Press the MODE button repeatedly until the Month/Date setting mode is reached. The readout of the Month/Date flashes now.
2.To set the month, press the TUN +/- button. To set the date, press the VOL +/- button.
3.Press the MEM button to confirm the settings.
13