GE EPM 3000P instruction manual Listing of Connection Diagrams, Electrical Installation

Chapter 2 Electrical Installation

2.5ELECTRICAL CONNECTION INSTALLATION

Choose the diagram that best suits your application and maintain the polarity. Follow the outlined procedure to verify correct connection.

NOTE: THE NEUTRAL READING IS CALCULATED FROM THE SUM OF THE 3 PHASES OF CURRENT. HIGH NEUTRAL CURRENT INDICATES REVERSE CT POLARITY.

LISTING OF CONNECTION DIAGRAMS

NOTE: SEE PHASE REVERSAL IF A MESSAGE OF PH APPEARS AFTER INSTALLATION.

IThree-Phase, Three-Wire System Delta with Direct Voltage and CTs.

IIThree-Phase, Three-Wire Open Delta with two CTs and two PTs.

(Open Delta System Installation should only be used if the electrical system is a 3-wire OPEN DELTA. Open Delta can be enabled or disabled in Programming Group 0, Function 3.)

IIIThree-Phase, Three-Wire Open Delta with three CTs and two PTs.

(Open Delta System Installation should only be used if the electrical system is a 3-wire OPEN DELTA. Open Delta can be enabled or disabled in Programming Group 0, Function 3.)

IV Three-Phase, Four-Wire System Wye with Direct Voltage and CTs.

VThree-Phase, Four-Wire System Wye with CTs and PTs.

VI Single Phase System

VII Dual Phase System

4

GE Industrial Systems