Installation requirements | Heat Controller BGE-103A, BGE-123A

Installation

Remove packing sheet from the back of the sleeve, and packing corner and blue tape from the air condi- tioner.

Installationrequirements

If you use an existing wall sleeve, you should mea-

sure its dimensions.

Install the new air conditioner according to these instal- lation instructions to achieve the best performance.

All wall sleeves used to mount the new air conditioner must be in good structural condition and have a rear grille to securely attach the new air conditioner. (FIG. 1)

With the HCI sleeve(optionally supplied with your unit), you can maintain the best performance of the new air conditioner. (FIG. 2)

19-21/32"

(499 mm)24-21/32"

(626 mm)

14-13/32"

(366 mm)

Air Conditioner

18"(458 mm)

FIG. 1

INSTALLATION HARDWARE

1		2
1		4
		4
		2 Size options
	7	5
	7

8	3
	6
	2 Size options
ITEM	NAME OF PARTS	Q'TY
1	PLASTIC GRILLE	1
2	HORIZONTAL INSULATION STRIPS	2
3	AROUND INSULATION STRIPS	2
4	SUPPORT BLOCK	2
5	BAFFLE	1
6	TRIM FRAME	2
7	SHIM	2
8	PLASTIC NUTS AND WASHER SCREWS	4

To avoid risk of personal injury, property damage, or product damage due to the weight of this device and

Expanded

aluminum metal grille

LGE Wall Sleeve

25-7/8"

(656 mm)

15-17/32"

(394 mm)

16-23/32"

(425 mm)

FIG. 2

sharp edges that may be exposed:

• Air conditioners covered in this manual pose an

excessive weight hazard. Two or more people are

needed to move and install the unit.

To prevent injury or strain, use proper lifting and

carrying techniques when moving unit.

• Carefully inspect location where air conditioner will

be installed. Be sure it will support the weight of the

unit over an extended period of time.

• Handle air conditioner with care. Wear protective

ELECTRICAL SERVICE

Check your available electrical service. The power supply available must be the same as that shown on the unit nameplate (found on left side of cabinet).

All models are equipped with a 3-prong service plug to provide proper service and safe positive grounding. Do not change plug in any way. Do not use an adapter plug. If your present wall outlet does not match your plug, call a qualified electrician to make the necessary corrections. SAVE CARTON for storage and this OWNER'S MANUAL for future reference. The carton is the best way to store unit during winter or when not in use.

gloves whenever lifting or carrying the unit. AVOID

the sharp metal fins of front and rear coils.

• Make sure air conditioner does not fall during instal-

lation.

REQUIRED TOOLS:

	• Tight Fitting gloves	• 3/8-inch open end
	• Standard screwdriver	wrench or adjustable
	• Standard screwdriver	wrench
	• Phillips screwdriver	wrench
	• Phillips screwdriver	• 1/4-inch hex socket and
	• Pliers	• 1/4-inch hex socket and
	• Pliers	ratchet
	• Sharp knife	• Tape measure
		• Electric drill
		• 1/4-inch drill bit

Service Manual 7

BGE-123A, BGE-103A specifications

The Heat Controllers BGE-103A and BGE-123A stand out as innovative solutions for temperature management in various indoor environments. These models are engineered for efficiency and user convenience, making them ideal choices for both residential and commercial applications.

One of the primary features of the BGE-103A and BGE-123A is their advanced temperature control system that utilizes precise sensors to maintain consistent indoor climates. This technology allows users to set their desired temperatures with exceptional accuracy, ensuring comfort while minimizing energy wastage. Both models are equipped with a digital display for easy monitoring and adjustment, allowing users to operate the unit effortlessly.

The BGE-103A is particularly noted for its compact design, making it suitable for smaller spaces. Despite its size, it is capable of delivering substantial heating output, ensuring that rooms are warmed quickly and efficiently. It promotes energy savings through its programmable timer feature, which allows users to set scheduling for when the unit should operate, thus lowering energy costs when heating is not needed.

On the other hand, the BGE-123A offers increased heating capacity, making it more suitable for larger areas. This model features an enhanced fan system that ensures a more even distribution of heat throughout the space, reducing cold spots that are often prevalent in larger rooms. Additionally, the BGE-123A includes multiple heat settings, giving users the option to customize their heating preferences based on specific needs.

Both models incorporate multiple safety features, including overheat protection and a tip-over switch, which automatically shuts off the unit in case of an accidental fall. These safety measures provide peace of mind for users, especially in households with children or pets.

In terms of design, the BGE-103A and BGE-123A come with modern aesthetics that can seamlessly blend into varied home or office décor. They are lightweight, making them easy to move between rooms as needed.

In summary, the Heat Controllers BGE-103A and BGE-123A are versatile, efficient, and specifically engineered to meet diverse heating needs. With their advanced technologies, energy-efficient features, and robust safety measures, they present an excellent investment for anyone seeking reliable indoor temperature control. Whether for a small office or a spacious living area, these models ensure that warmth and comfort are always within reach.