Heat Controller DMC36CA-1, DMC24CA-1 manual Remove the Air filters, Cleaner or washing with water

Page 23

Maintenance and Service

Maintenance and Service

IndoorUnit

Grille, Case and Remote Control

Turn the system off before cleanining, To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives.

NOTICE

Supply power must be disconnected before cleaning the indoor unit.

Air Filters

Air Outlet

The air filters behind the front grille should be checked and cleaned once every 2 weeks or more often if neccessary.

Air

Anti-

bacteria

Intake

filter

 

 

Remote

 

Controller

Rack

Air Filter

Never use any of the followings:

Water hotter than 40°C.

Could cause deformation and/or discoloration.

Volatile substances. Could damage the surfaces of the air conditioner.

 

SI

 

 

 

NNER

S

 

 

 

COURING

B

 

CL

BA RGER

enzene

 

 

1Remove the Air filters.

Take hold of the tab and pull slightly forward to remove the filter.

CAUTION: When the air filter is to be removed, do not touch the metal parts of the indoor unit.

It may cause an injury.

Clean dirt from the air filter using a vacuum

2cleaner or washing with water.

If dirt is conspicuous, wash with a neutral detergent in lukewarm water.

If hot water (50°C or more) is used, it may be deformed.

3After washing with water, dry well in the shade.

Do not expose the air filter to direct sunlight or heat from a fire when drying it.

4Install the air filter.

Owner's Manual 23

Image 23
Contents Important Information Heat CONTROLLER, INCTable of Contents Always ground the product There is risk of fire or electric shockDo not place anything on the power cable Do not modify or extend the power cableDo not allow water to run into electric parts Water leakage Leakage Install the drain hose toEnsure that water is drained Away properly Bad connection may causeDo not block the inlet or outlet of air flow On/Off Lights up during the system operation Filter Sign Signal ReceiverIndoor Unit Cassette Type Indoor UnitName and Function of Remote Controller Wireless remote controller do not operate the swirl mode Wireless Remote ControllerSignal transmitter Min Set the Current Time and day of the WeekIf you press SET/CLR button, then Press button repeatedly until desired mode appearsWeekly Programming Press the Program buttonSelf-diagnosis Function Holiday SettingTimer Setting Operation Mode Set the temperature lower than the room temperature Cooling Operation ModeAuto Operation Soft Dry Operation ModeCooling Operation To raise the Temperature To lower the Temperature Auto Operation ModeTemperature can be set within a range of -2~2 by 1 level Press the On/Off Button Press FAN Operation Button FAN Operation ModePress the On/Off Button. The unit will respond with a beep Comfort Operation with SwirlVane Control Fan speed and cooling capacity Auto Swing ModeChild Lock Function Plasma Purification Operation Forced OperationAuto Restart Function Tips for Filter sign LEDAfter washing with water, dry well in the shade Cleaner or washing with waterInstall the air filter Remove the Air filtersRecomended use period About 2 years Purifying filterOperation Tips Troubleshooting Heat CONTROLLER, INC
Related manuals
Manual 52 pages 2.95 Kb