Heat Controller DMC36CA-1, DMC24CA-1 manual Do not allow water to run into electric parts

Page 5

Safety Precautions

Do not allow water to run into electric parts.

It may cause There is risk of fire, failure of the product, or electric shock.

When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.

Do not use the telephone or turn switches on or off.

There is risk of explosion or fire

Do not open the inlet grill of the product during operation.

(Do not touch the electrostatic filter, if the unit is so equipped.)

There is risk of physical injury, electric shock, or product failure.

Do not store or use flammable gas or combustibles near the product.

There is risk of fire or failure of product.

If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect the power supply cable.

There is risk of electric shock or fire.

When the product is soaked (flooded or submerged), contact an Authorized Service Center.

There is risk of fire or electric shock.

Do not use the product in a tightly closed space for a long time.

Oxygen deficiency could occur.

Stop operation and close the window in storm or hurricane. If possible, remove the product from the window before the hurricane arrives.

There is risk of property damage, failure of product, or electric shock.

Be cautious that water could not enter the product.

There is risk of fire, electric shock, or product damage.

Ventilate the product from time to time when operating it together with a stove, etc.

There is risk of fire or electric shock.

Turn the main power off when cleaning or maintaining the product.

There is risk of electric shock.

Owner's Manual 5

Image 5
Contents Important Information Heat CONTROLLER, INCTable of Contents Always ground the product There is risk of fire or electric shockDo not place anything on the power cable Do not modify or extend the power cableDo not allow water to run into electric parts Ensure that water is drained Install the drain hose toAway properly Bad connection may cause Water leakage LeakageDo not block the inlet or outlet of air flow Indoor Unit Signal ReceiverCassette Type Indoor Unit On/Off Lights up during the system operation Filter SignName and Function of Remote Controller Wireless remote controller do not operate the swirl mode Wireless Remote ControllerSignal transmitter Min Set the Current Time and day of the WeekWeekly Programming Press button repeatedly until desired mode appearsPress the Program button If you press SET/CLR button, thenSelf-diagnosis Function Holiday SettingTimer Setting Operation Mode Set the temperature lower than the room temperature Cooling Operation ModeAuto Operation Soft Dry Operation ModeCooling Operation To raise the Temperature To lower the Temperature Auto Operation ModeTemperature can be set within a range of -2~2 by 1 level Press the On/Off Button Press FAN Operation Button FAN Operation ModePress the On/Off Button. The unit will respond with a beep Comfort Operation with SwirlVane Control Fan speed and cooling capacity Auto Swing ModeChild Lock Function Auto Restart Function Forced OperationTips for Filter sign LED Plasma Purification OperationInstall the air filter Cleaner or washing with waterRemove the Air filters After washing with water, dry well in the shadeRecomended use period About 2 years Purifying filterOperation Tips Troubleshooting Heat CONTROLLER, INC
Related manuals
Manual 52 pages 2.95 Kb