Heat Controller DMC36CA-1 There is risk of fire or electric shock, Always ground the product

Page 3

Safety Precautions

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.

WARNING

This symbol indicates the possibility of death or serious injury.

CAUTION

This symbol indicates the possibility of injury or damage.

Meanings of symbols used in this manual are as shown below.

Be sure not to do.

Be sure to follow the instruction.

WARNING

Installation

Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.

There is risk of fire or electric shock.

For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.

Do not disassemble or repair the product. There is risk of fire or electric shock.

Always ground the product.

There is risk of fire or electric shock.

Install the panel and the

Always install a dedicated

Use the correctly rated

cover of control box

circuit and breaker.

breaker or fuse.

securely.

 

 

There is risk of fire or electric shock.

Improper wiring or installation may cause fire or electric shock

There is risk of fire or electric shock.

Owner's Manual 3

Image 3
Contents Important Information Heat CONTROLLER, INCTable of Contents Always ground the product There is risk of fire or electric shockDo not place anything on the power cable Do not modify or extend the power cableDo not allow water to run into electric parts Water leakage Leakage Install the drain hose toEnsure that water is drained Away properly Bad connection may causeDo not block the inlet or outlet of air flow On/Off Lights up during the system operation Filter Sign Signal ReceiverIndoor Unit Cassette Type Indoor UnitName and Function of Remote Controller Wireless Remote Controller Signal transmitterWireless remote controller do not operate the swirl mode Min Set the Current Time and day of the WeekIf you press SET/CLR button, then Press button repeatedly until desired mode appearsWeekly Programming Press the Program buttonHoliday Setting Timer SettingSelf-diagnosis Function Operation Mode Set the temperature lower than the room temperature Cooling Operation ModeSoft Dry Operation Mode Cooling OperationAuto Operation Auto Operation Mode Temperature can be set within a range of -2~2 by 1 levelTo raise the Temperature To lower the Temperature Press the On/Off Button Press FAN Operation Button FAN Operation ModePress the On/Off Button. The unit will respond with a beep Comfort Operation with SwirlVane Control Auto Swing Mode Child Lock FunctionFan speed and cooling capacity Plasma Purification Operation Forced OperationAuto Restart Function Tips for Filter sign LEDAfter washing with water, dry well in the shade Cleaner or washing with waterInstall the air filter Remove the Air filtersRecomended use period About 2 years Purifying filterOperation Tips Troubleshooting Heat CONTROLLER, INC
Related manuals
Manual 52 pages 2.95 Kb