Heat Controller DMC24CA-1, DMC36CA-1 manual Do not modify or extend the power cable

Page 4

Safety Precautions

Do not modify or extend the power cable.

There is risk of fire or electric shock.

For installation, always contact the dealer or an Authorized Service Center.

There is risk of fire, electric shock, explosion, or injury.

Do not install, remove, or re- install the unit by yourself (customer).

There is risk of fire, electric shock, explosion, or injury.

Do not install the product on a defective installation stand.

It may cause injury, accident, or damage to the product.

Be cautious when unpacking and installing the product.

Sharp edges could cause injury. Be especially careful of the case edges and the fins on the condenser and evaporator.

Be sure the installation area does not deteriorate with age.

If the base collapses, the air conditioner could fall with it, causing property damage, product failure, and personal injury.

Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open.

Moisture may condense and wet or damage furniture.

Do not plug or unplug the power supply plug during operation.

Operation

Take care to ensure that power cable could not be pulled out or damaged during operation.

There is risk of fire or electric shock.

Do not touch(operate) the product with wet hands.

Do not place anything on the power cable.

There is risk of fire or electric shock.

Do not place a heater or other appliances near the power cable.

• There is risk of fire or electric

• There is risk of fire or electrical

shock.

shock.

There is risk of fire and electric shock.

4Cassette- Type Air Conditioner

Image 4
Contents Heat CONTROLLER, INC Important InformationTable of Contents There is risk of fire or electric shock Always ground the productDo not modify or extend the power cable Do not place anything on the power cableDo not allow water to run into electric parts Install the drain hose to Ensure that water is drainedAway properly Bad connection may cause Water leakage LeakageDo not block the inlet or outlet of air flow Signal Receiver Indoor UnitCassette Type Indoor Unit On/Off Lights up during the system operation Filter SignName and Function of Remote Controller Signal transmitter Wireless Remote ControllerWireless remote controller do not operate the swirl mode Set the Current Time and day of the Week MinPress button repeatedly until desired mode appears Weekly ProgrammingPress the Program button If you press SET/CLR button, thenTimer Setting Holiday SettingSelf-diagnosis Function Operation Mode Cooling Operation Mode Set the temperature lower than the room temperatureCooling Operation Soft Dry Operation ModeAuto Operation Temperature can be set within a range of -2~2 by 1 level Auto Operation ModeTo raise the Temperature To lower the Temperature FAN Operation Mode Press the On/Off Button Press FAN Operation ButtonComfort Operation with Swirl Press the On/Off Button. The unit will respond with a beepVane Control Child Lock Function Auto Swing ModeFan speed and cooling capacity Forced Operation Auto Restart FunctionTips for Filter sign LED Plasma Purification OperationCleaner or washing with water Install the air filterRemove the Air filters After washing with water, dry well in the shadePurifying filter Recomended use period About 2 yearsOperation Tips Troubleshooting Heat CONTROLLER, INC
Related manuals
Manual 52 pages 2.95 Kb