Heat Controller DMC24CA-1, DMC36CA-1 manual Install the drain hose to, Ensure that water is drained

Page 6

Safety Precautions

When the product is not be used for a long time, disconnect the power supply plug or turn off the breaker.

There is risk of product damage or failure, or unintended operation.

Take care to ensure that nobody could step on or fall onto the outdoor unit.

This could result in personal injury and product damage.

CAUTION

Installation

Always check for gas (refrigerant) leakage after installation or repair of product.

Low refrigerant levels may cause failure of product.

Install the drain hose to

Keep level even when

ensure that water is drained

installing the product.

away properly.

 

• A bad connection may cause

• To avoid vibration or water

water leakage.

leakage.

90°

Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.

It may cause a problem for your neighbors.

Use two or more people to lift and transport the product.

Avoid personal injury.

Do not install the product where it will be exposed to sea wind (salt spray) directly.

It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.

Operation

Do not expose the skin directly to cool air for long periods of time.

(Don't sit in the draft.)

This could harm to your health.

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.

• There is risk of damage or loss of property.

6Cassette- Type Air Conditioner

Image 6
Contents Heat CONTROLLER, INC Important InformationTable of Contents There is risk of fire or electric shock Always ground the productDo not modify or extend the power cable Do not place anything on the power cableDo not allow water to run into electric parts Away properly Bad connection may cause Install the drain hose toEnsure that water is drained Water leakage LeakageDo not block the inlet or outlet of air flow Cassette Type Indoor Unit Signal ReceiverIndoor Unit On/Off Lights up during the system operation Filter SignName and Function of Remote Controller Wireless Remote Controller Signal transmitterWireless remote controller do not operate the swirl mode Set the Current Time and day of the Week MinPress the Program button Press button repeatedly until desired mode appearsWeekly Programming If you press SET/CLR button, thenHoliday Setting Timer SettingSelf-diagnosis Function Operation Mode Cooling Operation Mode Set the temperature lower than the room temperatureSoft Dry Operation Mode Cooling OperationAuto Operation Auto Operation Mode Temperature can be set within a range of -2~2 by 1 levelTo raise the Temperature To lower the Temperature FAN Operation Mode Press the On/Off Button Press FAN Operation ButtonComfort Operation with Swirl Press the On/Off Button. The unit will respond with a beepVane Control Auto Swing Mode Child Lock FunctionFan speed and cooling capacity Tips for Filter sign LED Forced OperationAuto Restart Function Plasma Purification OperationRemove the Air filters Cleaner or washing with waterInstall the air filter After washing with water, dry well in the shadePurifying filter Recomended use period About 2 yearsOperation Tips Troubleshooting Heat CONTROLLER, INC
Related manuals
Manual 52 pages 2.95 Kb