Heat Controller DMC36CA-1, DMC24CA-1 manual Operation Tips

Page 25

Maintenance and Service

Whentheairconditioneris not GOING to beusedfor a longtime.

When it is not going to be used for

a long time.

1Operate the air conditioner at the following settings for 2 to 3 hours.

•Type of operation: Fan operation mode.(Refer to page 18.)

•This will dry out the internal mechanisms.

2Turn off the breaker.

CAUTION: Turn off the breaker when the air conditioner is not going to be used for a long time.

Dirt may collect and may cause a fire.

When the air conditioner is to be used again.

1Clean the air filter and install it in the indoor unit.

(Refer to page 24 for cleaning it.)

2Check that the air inlet and outlet of the indoor/outdoor unit are not blocked.

Check that the ground wire is

3connected correctly. It may be connect to the indoor unit side.

Helpful information

The air filters and your electiric bill.

If the air filters become clogged with dust, the cooling capacity will drop, and 6% of the electricity used to operate the air conditioner will be wasted.

OperationTips

Do not overcool the room.

This is not good for the health and wastes electricity.

Keep blinds or curtains

closed.

Do not let direct sunshine enter the room when the air conditioner is in operation.

Keep the room temperature

uniform.

Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in the room.

Make sure that the doors

and windows are shut tight.

Avoid opening doors and windows as much as possible to keep the cool air in the room.

Clean the air filter

Ventilate the room

regularly.

occasionally.

Blockages in the air filter reduce

Since windows are kept closed,

the airflow and lower cooling and

it is a good idea to open them

dehumidifying effects. Clean at

and ventilate the room now and

least once every two weeks.

then.

Owner's Manual 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Important Information Heat CONTROLLER, INCTable of Contents Always ground the product There is risk of fire or electric shockDo not place anything on the power cable Do not modify or extend the power cableDo not allow water to run into electric parts Ensure that water is drained Install the drain hose toAway properly Bad connection may cause Water leakage LeakageDo not block the inlet or outlet of air flow Indoor Unit Signal ReceiverCassette Type Indoor Unit On/Off Lights up during the system operation Filter SignName and Function of Remote Controller Signal transmitter Wireless Remote ControllerWireless remote controller do not operate the swirl mode Min Set the Current Time and day of the WeekWeekly Programming Press button repeatedly until desired mode appearsPress the Program button If you press SET/CLR button, thenTimer Setting Holiday SettingSelf-diagnosis Function Operation Mode Set the temperature lower than the room temperature Cooling Operation ModeCooling Operation Soft Dry Operation ModeAuto Operation Temperature can be set within a range of -2~2 by 1 level Auto Operation ModeTo raise the Temperature To lower the Temperature Press the On/Off Button Press FAN Operation Button FAN Operation ModePress the On/Off Button. The unit will respond with a beep Comfort Operation with SwirlVane Control Child Lock Function Auto Swing ModeFan speed and cooling capacity Auto Restart Function Forced OperationTips for Filter sign LED Plasma Purification OperationInstall the air filter Cleaner or washing with waterRemove the Air filters After washing with water, dry well in the shadeRecomended use period About 2 years Purifying filterOperation Tips Troubleshooting Heat CONTROLLER, INC
Related manuals
Manual 52 pages 2.95 Kb
Top Page Image Contents