Haier ESA424J-L manual LocationRequirements, ElectricalRequirements, Window Installation

Page 4

LocationRequirements

IMPORTANT: Observe all governing codes and ordinances.

Check the location where the air conditioner will be installed. Make sure you have everything necessary for correct installation. The location should provide:

Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.

NOTE: Do not use an extension cord.

Free movement of air in room to be cooled.

A large enough opening for the air conditioner. Installation parts are supplied for double-hung windows.

Adequate wall support for weight of air conditioner. Air conditioner weighs 138 lbs to 152 lbs (62.6 kg to 68.9 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers.

A

ElectricalRequirements

The electrical ratings for your air conditioner are listed on the model and serial number label. The model and serial number label is located either on the side or back of the air conditioner cabinet or behind the front grille.

Specific electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the power supply cord.

A. Cabinet louvers

Window Installation

Window opening measurements:

31¼” minimum to 40” (79.4 cm to 101.6 cm) maximum opening width.

20¼” (51.4 cm) minimum opening height.

A

B

A. 31¼” (79.4 cm) minimum

B. 20¼” (51.4 cm) minimum

Power Supply

 

Cord

Wiring Requirements

208/230-volt (187 min. to 253 max.)

0 to 12 amps

20-amp time-delay fuse or circuit breaker

Use on single outlet circuit only.

Recommended Grounding Method

This air conditioner must be grounded. This air conditioner is equipped with a power supply cord having a 3 prong grounding plug. The cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer’s responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical installer.

It is the customer’s responsibility:

To contact a qualified electrical installer.

4

Image 4
Contents Climatiseurdepièce Índice TableofcontentsTabledesmatières Airconditionersafety InstallationrequirementsToolsandParts Parts suppliedWindow Installation Power Supply CordLocationRequirements ElectricalRequirementsPrepareAirConditionerforInstallation InstallationinstructionsUnpacktheAirConditioner PositionAirConditioner PrepareWindowforInstallationAssemble Curtain/Top channel CompleteInstallation Install outer case in windowReturn chassis to the outer case Airconditioneruse StartingYourAirConditionerFan Speed ModeTemperature Timer DelayTo clear Timer delay program To see or change the remaining time in hoursPower SpeedCleaningtheAirFilter AirconditionercareChangingAirDirection NormalSoundsTroubleshooting CleaningtheFrontPanelAnnualMaintenance Air ConditionerAir conditioner seems to run too much filter is dirty or obstructed by debris. Clean the filterWater drips from cabinet into your house IntheU.S.A AssistanceorserviceInCanada Limitedwarranty ONE Year Limited WarrantySeguridaddelacondicionadordeaire RequisitosdeinstalaciónHerramientasypiezas Piezas suministradasRequisitosdeubicación RequisitoseléctricosInstalación en la ventana El cable eléctricoInstruccionesdeinstalación DesempaqueelacondicionadordeaireCable de suministro de energía Para poner a prueba el cable de suministro de energíaPreparacióndelaventanaparalainstalación ColoqueelacondicionadordeaireensulugarPreparacion de la unidad para la instalación PrecaucionCompletelainstalación Instalacion de la caja exterior en la ventanaColoque EL Chasia EN LA Caja Externa Cómousarelacondicionadordeaire CómoponerenmarchasuacondicionadordeaireModo Velocidad del ventiladorPara despejar el programa de retraso del temporizador TemperaturaPara ver o cambiar el tiempo restante en horas Cómousarelcontrolremoto Timer TemporizadorEncendido Cuidadodesuacondicionadordeaire El acondicionador de aire no funciona SolucióndeproblemasParece que el acondicionador de aire funciona excesivamente EnlosEE.UU AyudaoserviciotécnicoEnlosCANADÁ Garantíalimitada Garantía Limitada DE UN AÑOPage EXIGENCESD’INSTALLATION SécuritéduclimatiseurOutillageetpièces Pièces fourniesExigencesd’emplacement Installation dans la fenêtreMéthode recommandée de la liaison à la terre SpécificationsélectriquesINSTRUCTIONSD’INSTALLATION DéballageduclimatiseurCordon d’alimentation Pour tester le cordon d’alimentationPréparerleclimatiseurpourl’installation Préparationdelafenêtrepourl’installationPréparez le climatiseur pour l’installation PositionnementduclimatiseurAcheverl’installation Installer l’habillage externe dans la fenêtreReplacer le boitier dans l’habillage estêrieur Utilisationduclimatiseur MiseenmarcheduclimatiseurFan Speed vitesse du ventilateur RemarquePour effacer le programme de durée différée de la minuterie TempératurePour voir ou modifier le temps qui reste en heures Power mise sous tension UtilisationdelatélécommandeVitesse du ventilateur Entretienduclimatiseur Dépannage AuxÉtats-Unis AssistanceouserviceAuCanada Garantielimitée Garantie Limitée DE Cinq ANS SUR LE Système Scellé

ESA424J, ESA424J-L specifications

The Haier ESA424J and ESA424J-L are standout air conditioning units designed to deliver efficient and effective cooling solutions for residential spaces. These models are particularly well-regarded for their performance, energy efficiency, and user-friendly features, making them ideal choices for homeowners looking for reliable climate control.

One of the primary features of the ESA424J and ESA424J-L is their cooling capacity. With a robust BTU rating, these air conditioners can effectively cool spaces up to a certain square footage, making them suitable for medium to large rooms. This capability ensures that users can enjoy a comfortable indoor environment even during the hottest summer months.

Energy efficiency is a significant hallmark of the Haier ESA424J series. These models boast an impressive Energy Efficiency Ratio (EER), which translates to lower energy consumption and reduced electricity bills. The implementation of advanced technologies allows these units to deliver cooling without excessive power usage, aligning well with modern energy-saving standards.

Both units feature a user-friendly interface, allowing for easy temperature adjustments and mode selections. The remote control provided with these models enhances convenience, letting users operate the air conditioner from across the room. Additionally, the quiet operation of the ESA424J and ESA424J-L ensures that users can maintain a peaceful environment while enjoying optimal cooling.

Another notable characteristic of these air conditioners is their versatile installation options. The Haier ESA424J and ESA424J-L are designed for window installation, making them suitable for various room layouts in apartments or houses. The compact design allows for efficient use of space without compromising on performance.

Additionally, these models are equipped with various cooling and airflow modes, including fan-only and dehumidification options. This adaptability allows users to customize their cooling experience according to specific needs, whether it’s circulating air or simply reducing humidity levels in the room.

In conclusion, the Haier ESA424J and ESA424J-L air conditioning units are defined by their impressive cooling capacity, energy efficiency, user-friendly controls, and versatile installation options. Combining effective cooling technologies with thoughtful design, these models stand out as reliable solutions for maintaining comfort in residential spaces all summer long.