ENGLISH
ELECTRICAL REQUIREMENTS cont.
TO TEST YOUR POWER SUPPLY CORD:
1.Plug power supply cord into a mating, grounded 3 prong outlet.
(See Fig.3)
2. Press RESET (on some devices, a green light will turn on).
Fig. 3
3. Press TEST (listen for click; Reset button will trip, and on some devices, a green light will turn off).
4. Press and release RESET (listen for click; Reset button will latch, and on some devices, a green light will turn on). The power supply cord is ready for operation.
NOTE:
• The RESET button must be pushed in completely for proper operation. (See Fig.4)
• The power supply cord must be replaced if it fails to trip when the test
button is pressed or fails to reset. | RESET |
| |
• DO NOT turn the air conditioner on or off by unplugging the power | Fig. 4 |
TEST | |
supply cord from the outlet. Always turn the air conditioner on or off at |
|
the control panel or by using the remote control. |
|
• A damaged power supply cord must be replaced with a new power |
|
supply cord obtained from the product manufacturer and installed my |
|
a qualified service professional. It cannot be purchased at a retail store |
|
and must not be repaired by the user. |
|
If the power supply cord is damaged please call Haier Customer Service:
•The power supply cord contains no
•Opening the
PAGE 10 | INSTALLATION REQUIREMENTS |