![](/images/new-backgrounds/1022780/2278031x1.webp)
PREPARING THE AIR CONDITIONER cont.: ESA415 / ESA418
1.Measure the width of the window opening. (See Fig.8)
2.Mark the center line on the inside of the windowsill with a pencil. (See Fig.9)
WIDTH OF |
|
|
|
| CENTER LINE |
|
|
|
| ||
|
|
|
| ||
WINDOW OPENING |
|
|
| ||
|
|
|
| ||
Fig. 8 |
|
|
| Fig. 9 |
WIDTH
CENTER
NOTES AND WARNINGS:
•Be sure your air conditioner does not fall out of the opening during installation or removal.
•A grounded electrical outlet must be within 4 ft. (122 cm) of where the power supply cord exits the air conditioner.
•Do not block the air discharge or air intake areas on the front panel.
•Do not block the louvers on the outside of the air conditioner.
INSTALL THE CABINET IN THE WINDOW (See Fig.10)
FOR MODELS: | ESA415M ESA418M |
1.Center the cabinet in the windowsill. Make sure to place the cabinet so that it is resting on the windowsill with a ¼" to ½" downward tilt towards the outside (See Fig. 10). Lower the window sash behind the front flange of the top channel to hold the unit in place. The bottom channel must rest behind the window sill.
NOTE: The appearance of your model may differ from the one shown.
Fig. 10
Bottom Channel
Window Sill
ENGLISH
HOW TO INSTALL | PAGE 13 |